Documents

B-17

Description
NATIONAL OIL CORPORATION GENERAL ENGINEERING SPECIFICATION GES B.17 DOORS AND WINDOWS Rev Date Description Checked Approved 0 1999 Issued for Implementation DL Compiled by Teknica (UK) Ltd GENERAL ENGINEERING SPECIFICATION DOORS AND WINDOWS GES B.17 Page 2 of 15 Rev 0 1999 INDEX SEC TITLE PAGE 1.0 SCOPE OF SPECIFICATION 3 1.1 Int
Categories
Published
of 15
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
    NATIONAL OIL CORPORATION GENERAL ENGINEERING SPECIFICATION GES B.17 DOORS AND WINDOWS   Rev   Date   Description   Checked   Approved  0 1999 Issued for Implementation DL Compiled by Teknica (UK) Ltd      GENERAL ENGINEERING SPECIFICATION DOORS AND WINDOWS GES B.17 Page 2 of 15 Rev 0 1999   INDEX  SEC TITLE PAGE 1.0 SCOPE OF SPECIFICATION 3 1.1 Introduction 3 2.0 DEFINITIONS 3 2.1 Technical 3 2.2 Contractual 4 3.0 DESIGN 5 3.1 Codes and Standards 5 4.0 PERFORMANCE REQUIREMENTS FOR DOORS AND WINDOWS 7 4.1 Performance Requirements for Doors 7 4.2 Performance Requirements for Windows 7 4.3 Prevention of Water, Dust and Sand Penetration 7 5.0 DOOR CONSTRUCTION 7 5.1 General 7 5.2 Cellular-Core Flush Doors 8 5.3 Skeleton-Core Flush Doors 8 5.4 Solid Core Doors 8 5.5 Fire Doors 8 6.0 WINDOW CONSTRUCTION 9 6.1 General 9 6.2 Performance 9 6.3 Specific Requirements 9 7.0 IRONMONGERY 9 7.1 Ironmongery Checklist 10 8.0 INSPECTION 10 8.1 Procedures 10 DRAWINGS Figure 1 11 Figure 2 12 Figure 3 13 Figure 4 14 Figure 5 15   GENERAL ENGINEERING SPECIFICATION DOORS AND WINDOWS GES B.17 Page 3 of 15 Rev 0 1999   1.0  SCOPE OF SPECIFICATION  1.1  Introduction  This specification sets out the minimum criteria for the design and construction of doors and windows, serving petrochemical installations, processing facilities and their associated ancillary buildings. It is not a definitive, technical, contract specification, but is intended to serve as a briefing document for the Owner and Vendor/Contractor and to set the standards for building function, construction and ease of maintenance. Its scope is confined to standard flush, external, internal and fire resisting timber doors together with basic aluminium patio doors and windows using frame and gasket sections. It also includes guidance on the selection criteria for door ironmongery. It excludes commercial doors, steel doors, or industrial sliding, overhead and roller shutter doors. Design guidance for these items, where required, is given in the individual NOC, building specifications. 1.1.1 The intent of the document is: To provide the Owner and Vendor/Contractors with clear design guidelines for the construction of doors and windows and to ensure that submitted designs for doors and windows shall be appropriate and that they conform to good practice with regard to convenience and ease of maintenance. To standardise design, by providing comprehensive recommendations and requirements within a single document. To set benchmark standards for both function and construction, and to provide the framework for cost-control to be implemented. To give guidance which takes into account the climatic conditions and general methods of construction  prevailing. 1.1.2 Any items not specifically covered in this specification shall be designed and engineered in accordance with good engineering practice. All proposed designs shall be approved by the Owner prior to implementation. Any exceptions to this specification shall be authorised by the Owner. 1.1.3 The Vendor/Contractor shall fully comply with the provisions laid down in this specification. any exception shall be authorised in writing by the Owner. 1.1.4 In the event of any conflict between this specification and any applicable codes and standards, the Vendor/Contractor shall inform the Owner in writing and receive written clarification before proceeding with the work. 1.1.5 This General Engineering Specification shall form part of the Purchase Order/Contract. 2.0  DEFINITIONS  2.1  Technical  For the purpose of this specification, the following definitions shall hold: Door-frame: The whole of the fixed framework of the doorset, which is built into or attached to the structure of the  building, and on which the door leaf is hung. Door-leaf: The moveable part of the doorset.   GENERAL ENGINEERING SPECIFICATION DOORS AND WINDOWS GES B.17 Page 4 of 15 Rev 0 1999   Door-set: The doorset includes door leaf and door frame. Leaf-frame: Those parts of the door leaf which provide the required mechanical strength, either by themselves or in conjunction with the facings. Core: The material placed between leaf facings. Facings: External surfaces of the door leaf, enclosing the framing and/or core. Lipping: Finishing strips applied to the edges of the door leaf. External Door: Door exposed to the effects of the weather. Flush door: A door leaf which is a composite of concealed frame and core, with flat facings. 2.2  Contractual  The commercial terms used in this specification are defined as follows: Owner The oil and gas company, an associate or subsidiary, who is the end user of the equipment and facilities. Vendor The company supplying the equipment and material. Contractor The main contractor for a defined piece of work. Sub-Contractor A company awarded a contract by a Contractor to do part of the work awarded to the Contractor. Inspection Authority The organisation representing the Owner or Vendor/Contractor that verifies that the equipment and facilities have been designed, constructed, inspected and tested in accordance with the requirements of this specification and the Purchase Order/Contract.
Search
Tags
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x