Documents

Bombas PCM

Description
PCM MOINEAU Hygienic Progressive-Cavity Pumps H Series W! NE Benefits Of Moineau technology ã Does not alter pumped product ã High suction power ã Constant pulse-free flow ã Ease of maintenance ã Reversibility Of Moineau Series H Pumps ã Cleanable (no retention areas, simplified shaft line, CIP piping, eccentric pipe) ã Versatile (variety of products and applications) ã Productive (limited, rapid maintenance operations) ã Control of design, manufacture and associated services. PCM H Series
Categories
Published
of 12
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  PCM MOINEAU HygienicProgressive-Cavity PumpsH Series N   E   W   !     2 Characteristics ã Maximum flow: 40 m 3  /h ã Maximum pressure: 24 bar ã Maximum temperaturein continuous operation: 90°C ã Sterilization temperature when idle: 140°C ã Capacity: 0,048 liter to 2,048 liter ã Size of acceptable particles: up to 40 mm. Operation A Moineau pump is made up of a helical rotorturning inside a helical stator. The stainless-steelrotor is machined to a high degree of precision,and the stator is moulded in a resilient elastomer.The geometry and the dimensions of these partsare such that when the rotor is inserted into thestator,a double chain of watertight(honeycomb-shaped) cavities is created.When the rotor turns inside the stator,the honeycomb progresses spirally along the axisof the pump,without changing either shape orvolume. This action transfers the product fromthe pump inlet to the pump discharge. Benefits Of Moineau technologyã Does not alter pumped product ã High suction power ã Constant pulse-free flow ã Ease of maintenance ã Reversibility Of Moineau Series H Pumpsã Cleanable (no retention areas,simplified shaft line,CIP piping,eccentric pipe) ã Versatile (variety of products and applications) ã Productive (limited,rapid maintenance operations) ã Control of design,manufacture and associatedservices. PCM H Series Pumps: The pumping solution foryour ultra-clean applications. Custom designed for applications requiring stringent hygiene,the H series pumps incorporate numerous srcinal technical features:ã Designed to eliminate potential product-retainingã A simplified shaft line without jointã Mechanical seal positioning optimized to facilitate cleaningã CIP piping,allowing the pump casing to be cleaned at a high flow-rateã Designed to allow pump sterilisation when not running using steamor superheated water. L Casing – AISI 316L Stainless steel Glass blasted exteriorInternally polished along 220 grain SMS,DIN and CLAMP connections. L ;;; ;;; ;;; ;;; ;; ;; ;;;;; ;;;;; ;;;;; ;;;;;  ;;;; ;;;; ;;;; ;;;; ;;;; ;;;;  ;;; ;;; ;;;;; ;;;;; ;;;;; ;;; ;;; ;;; ;;; ;;;   ; ; ;;;   ; ; Eccentric pipe - AISI 316L stainless steel Avoids product retention. SMS,DIN and CLAMP connections. L Flexible shaft -stainless steel without external coating A new design of the shaft line which cuts downthe number of moving parts – thus the numberof wear parts – and improve the cleanabilityof the pump. L Rotor - AISI 316L stainless steel Can be chrome-plated. L Stator envelope - AISI316L Stainless steel For a general hygienicrespect of your workshop. L Feet - Plastic with stainless steel or stainless steel coated cast-iron inserts Using the clamping system to secure the pump casing and stator facilitates disassemblyfor maintenance and allows to orientate suction port and CIP pipe in 3 positions(vertical,left or right horizontal). L Stator – White or black food quality elastomer Available in 1,2 or 4-pitch length*. * A pitch length is the length of stator required for honeycomb cellto rotate through 360°about the pump axis. L  3 HygienicProgressive-Cavity PumpsH Series Construction of H Series Applicable directives and standardsOptional equipment Stainless-steel trolley Certain H Series pumps may be mounted on astainless steel trolley with self-locking wheels tofacilitate transport between factory-floor applications,thereby improving the versatility of your capitalequipment. As an additional option,the pump issupplied with adjustable feet,allowing it to behorizontally oriented according to the slope of yourfactory floor. Double enveloped pump casing and stator Certain operations require products to be keptat temperature (hot or cold). The use of a doubleenvelope for the pump casing and the stator allowsthe circulation of heat-exchanging fluid. ãããããããããããã Cover - Stainless-steel Protective covering for thedrive elements againstsplashes during workshopcleaning. L Mechanical seal cartridge assemblyCarbon/Ceramic or Carbide/Carbide The cartridge mounting (compression factory adjusted) and accessibilitythrough the back (on the drive side) facilitates the mechanical seal’sreplacement. Depending on products and applications,mechanical sealcan be single,single with quench,or double. The optimal positioning inrelation to the the suction pipe facilitates CIP. L CIP piping - AISI 316L Stainless steel Allows for cleaning in place the pump casing at a large-outflowOrientable vertical positioning,left or right tangentialSMS,DIN and CLAMP connections. L Spacer - Cast Iron FGL 250 This is a connecting piece between thepump casing and the drive,and supportsthe sealing system. The strut may bedirectly flanged or connected to a bearingwhich is hooked-up to the drive throughan elastic coupling. L Base plate - Stainless steel All the H Series pumps may be mounted onto astainless-steel base plate with or without adjustablefeet for leveling the pump if your workshop floor isuneven or sloping. L  HygienicProgressive-Cavity PumpsH Series 4  A new methodof transmission: The flexible rod The traditional bearing line,made up of a rod and two universal joints,is replacedby a flexible stainless-steel rod. It has particular mechanical resistance characte-ristics,so that by simply deforming,it converts the concentric rotation of the driveshaft into the eccentric motion of the rotor.This allows for a considerable reduction in the number of parts making up the driveshaft,and all moving parts are eliminated,thereby simplifying assembly/disas-sembly during maintenance operations and the reduction in stocks of wearingparts. Furthermore,the smaller amplitude of the flexible shaft's movement hasmade for a reduction in the diameter of the pump casing,so increasing the speedwith which cleaning solutions pass through the pump while it is being cleaned.The absence of joints,and of the joints protection boots,improves the pump clea-nability and eliminates pollution such a lubricant leak or bacterial contaminationthrough the boots joint protection in case of accidental or forced wearness special-ly during maintenance.The H series pumps are equipped with a new generation of mechanical seals,specially designed for applications requiring a rigorous degree of hygiene. Twofriction face pairs are available : Carbon/Ceramic,and Silicon Carbide/SiliconCarbide. Mechanical seal can be single,single with quench,or double.An optimal location of the seal in relation to the pump-casing suction piping favorscleaning.Cartridge assembly performed at the factory facilities maintenance operations byremoving the adjustement constraints at installation. Furthermore,access throughthe back (drive side) allows servicing without having to disassemble the entirepump,which remains connected to the installation. These two major advantagesdivide by two the time needed to replace the seal,thereby reducing the productionstoppage time.Complete process control (formulation,mixing,injection,and polymerisation) have allowed our research engineers to developp elastomers perfectlycompatible with the food and cosmetic products.ã Numeruous available formulas : - PCM mixing number 244 (white) suitable for all applications,- PCM mixing numbers 176 and 177 (black) suitable for all applications,- PCM mixing numbers 164 (black) suitable for all applications on fat products.ã Wide temperature compatibilities suitable with processes and cleaning in place (CIP) from 0 up to 90 °C.  A thorough control of elastomer technology  New leak-proofingsystem: Cartridge mountedmechanical seal removablethrough the back 
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x