Documents

BS-EN-1435-1997-A1-A2-2003

Description
BS
Categories
Published
of 36
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  BRITISH STANDARDBS EN 1435:1997 Incorporating Corrigendum No. 1 and Amendments Nos. 1 and 2  Non-destructive testing of welds — Radiographic testing of welded joints The European Standard EN 1435:1997, with the incorporation of amendments A1:2002 and A2:2003, has the status of a BritishStandard ICS 25.160.40             ”  BS EN 1435:1997 This British Standar having been prepared under th direction of the Engineering Sector Board was ublishd under the authority of Standards Board and comes into effet on 15 Decem 1997© BSI 1 March 2004 SBN 0 580 28913 3 National foreword This British Standard is the English language version of EN 1435:1997, including amendments A1:2002 and A2:2003. It supersedes BS 2600-1:1983, BS 2600-2:1973, BS 2910:1986 and BS7257:1989, which are withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags ! . Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by ! . As agreed by CEN/TC 121/SC 5 resolution 134/2000 and in accordance with amendment A1:2002, the term “examination” has been replaced by “testing” throughout the document.The UK participation in its preparation was entrusted to Technical Cmmittee WEE/46, Non-destructive testing, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implemen irnational or European publications referred to in this document may be found in the  BSI Catalogue  under the section entitled “International Standards Correspondence Index”, or by using the “Search” faility of the  BSI Electonic Catalogue or of BritishStandards Online.This publication does not purpt to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.  – aid enquirers to understand the text;  – present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;  – monitor related international and European developmen and promulgate them in the UK. Summay of pages This documnt comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.  Amendments issued since publication  Amd. No.DateComments10616 CorrigendumNo.1  August 1999Correction to Table 21398515 November 2002See national foreword1493815 March 2004Changes to foreword and deletion of  Annex ZA  EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORM EN 1435  August 1997 + A1 May 2002 + A2 December 2003 ICS 25.160.40Descriptors: Welded joints, fusion welding, butt welds, quality control, non-destructive tests, radiographic analysis, setting-up conditions English version Non-destructive testing of welds — Radiographictesting of welded joints (includes amendments A1:2002 and A2:2003) Contrôle non destructif des assemblages soudés— Contrôle par radiographie des assemblages soudés(inclut les amendements A1:2002 et A2:2003)Zerstörungsfreie Prüfung von Schweißverbindungen — Durchstrahlungsprüfung von Shmelzschweißungen(enthält Änderungen A1:2002 und A2:2003) This European Standard was pproved by CEN on 1997-08-02. Amendment A1was approved by CEN on 200205-05; amendment A2 was approved by CENon2003-11-20. CEN members are ound to comply with the CEN/CENELECInternal Regulations which stipulate he conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to anyCEN member. This European Standard exists in three official versions (English,French, German). A version in any other language made by translation underthe responsibility of a CEN member into its own language and notified to theCentral Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels © 1997 CEN — All rights of exploitation in any form and by any means reserved worldwide for CEN national members.Ref. No. EN 1435:1997 + A1:2002 + A2:2003 E  EN 1435:1997 © BSI 15 March 2004 2 Foreword This European Standard has been prepared by Technical Committee CEN/TC 121, Welding, the Secretariat of which is held by DS.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 1998, and conflicting national standards shall be withdrawn at the latest by February 1998.This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document EN 1435:1997/A1:2002 has been prepared by Technical Committee CEN/TC 121, Welding, the Secretariat of which is held by DS.This amendment to the European Standard EN 1435:1997 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest by November 2002.This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). Annex A and Annex B are normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A2 This document EN 1435:1997/A2:2003 has been prepared by Technical Committee CEN/TC 121, Welding, the Secretariat of which is held by DS.This amendment to the European Standard EN1435:1997 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest by June 2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks