Documents

BS X 38-2005

Description
BS X 38-2005
Categories
Published
of 12
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  BRITISH STANDARD AEROSPACE SERIESBS X 38:2005 Heat curing paint scheme for aerospace purposes—Specification ICS 49.040; 87.040              BS X 38:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 1February2005© BSI 1February2005The following BSI references relate to the work on this BritishStandard:Committee reference ACE/65Draft for comment 04/30080333DC ISBN 0 580 45190 9 Committees responsible for this BritishStandard The preparation of this British Standard was entrusted to Technical Committee ACE/65, Non-metallic materials for aerospace purposes (excluding textiles), upon which the following bodies were represented:British Hydromechanics Research GroupBritish Plastics FederationSociety of British Aerospace CompaniesThe following bodies were also represented in the drafting of this standard through subcommittees and panels:British Coatings Federation Ltd.Ministry of Defence— UK Defence StandardizationOil and Colour Chemists Association  Amendments issued since publication  Amd. No.DateComments  BS X 38:2005 © BSI 1 February 2005 i Contents PageCommittees responsibleInside front coverForewordii1Scope12Normative references13Terms and definitions24Materials25Performance26Batch inspection2 Annex A (normative) Type approval6 Annex B (normative) Preparation of test panels6Table 1 — Tests on liquid paint, type A3Table 2 — Tests on liquid paint, type B3Table 3 — Tests on dry film, type A4Table 4 — Tests on dry film, type B5  BS X 38:2005 ii © BSI 1 February 2005 Foreword This British Standard has been prepared by Technical Committee ACE/65 and is one of a series for paints and varnishes suitable for aerospace purposes. It covers the specification of heat curing paint for aerospace applications up to220  ° C.It has been assumed in the drafting of this standard that the execution of its provisions is entrusted to appropriately qualified and experienced people.The quality assurance authority and approving authority referred to in the standard are as stated in the contract or order, or the accredited representative of the authority stated, as instructed by the purchaser.WARNINGThis British Standard calls for the use of substances and/or procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages1 to6, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x