SAP NWBC Check List

of 3
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
  1.   Activate ICM Services through SICF and check FULL HOSTNAME for HTTP & HTTPS. The hostname should have fully qualified name like ******.com The Internet Communication Manager (ICM) enables communication between your SAP system and the Internet using the HTTP or HTTPS protocols for the NWBC applications. NWBC (both the shell and most content area types) uses HTTP to access an ABAP server. It is important that at a minimum one HTTP or HTTPS port is configured and active. Any changes you make here are lost when you restart. If you want to create or change a service permanently, you must do this using the profile parameter icm/server_port_<xx>. Tcode:  SMICM then Header   Menu   Path:  Goto -> Services Incorrect Correct Note:   Web dispatcher    can be placed before the AS ABAP system(s) to function as a reverse proxy. The Web dispatcher is then normally configured to access the server through HTTPS (for higher security) and to forward all data to the server through HTTP (for higher performance). In these scenarios, pay special attention to the configuration of the HTTPURLLOC table in accordance with the information in URL Generation in an AS-ABAP - Web Dispatcher Configuration.  2.   Set HOSTNAME Parameter through Tcode:  RZ10 for it to appear for ICM Service HTTP, SMTP and HTTPS shown above. The following variables and parameters are used to set the host names.     SAPLOCALHOST    SAPLOCALHOSTFULL    icm/host_name_full The ICM sets the FQHN in accordance with the hierarchy below: 1.   Parameter SAPLOCALHOSTFULL in the SAP profile (recommended for high availability configurations) has top priority. If it is set in the profile file, the ICM takes this as the FQHN value. Note that the system default value of SAPLOCALHOSTFULL contains the host name without the domain, which is why the ICM ignores the system default. 2.   If the parameter is not set, the value in SAPLOCALHOSTFULL icm/host_name_full is used. 3.   If this parameter is also not set, the ICM takes the FQHN of the operating system. Check the settings of the hosts file at operating system level. Parameter SAPLOCALHOST is not fully qualified and is not used by the ICM for services. SAP recommend you set either   SAPLOCALHOSTFULL   (for high availability configurations), icm/host_name_full. 4. A host has the two fully qualified host names and If none of the parameters specified is set, the name is taken from the operating system since this is the first one in the etc/hosts. If, however, you want the host to be addressed externally by the name To do this, set the parameters:   icm/host_name_full =   3.   The storage
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!