Team Tritans

of 16
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
  Virtual presentation  TECHNICAL SPECIFICATION& KART VIEWS PARAMETERVALUE Overalllength 69.01inchWheelbase 45inchTrack width 40inchTotal weight 120kgWeight distributionFront -42%Rear -58%Ground clearance 2 inchEngine typeCVTFront track width40 inch Rear track width40inch Steering system Ackerman’s 4 bar mechanismChassis typeLadder typeEngine mountingCentrally mounted Material Mild Steel 1018PrimaryMember Outside dia.=25.4Inside dia.=22.1SecondaryMemberOutsidedia.=25.4mmInside dia.=20.4mmFRONT VIEW SIDEVIEWTOP VIEW  CONFORMANCE TO RULEBOOK Dimension of go cart Our kartAccording to ruleWheel base must be40 inch 55 inch The vehiclemust have adequate ground clearance 2 inch 2 inch Differencebetween front track and rear track width40 inch 40 inch  No.of accessible kill switches 2kill switches2 kill switchesClearance betweenside  bumper & driver seat 3 inch3 inch Clearancebetween driver seat ,firewall & engine 3 inch 3 inch  DESIGN METHODOLOGY &   MATERIAL SELECTION  literature rule book   internet  –  market survey  safety-reliability  managements  sketch design  design in software  finalization & test  MATERIAL SELECTION PROCEDURE material of less weight without compensating the strength was taken in consideration. Two thickness were taken as per frame design requirement having the outer diameter of 25.4 mm.  MATERIAL PROPERTIES ã Material = AISI1018 ã Density = 7.9 g/cm3 (490 lb./ft3) ã Elastic = 210GPa (30 x 106 psi) ã Poisson's Ratio = 0.29 ã Specific Heat Capacity = 450J/kg-K  ã Strength to Weight  –  Ratio= 54 to 59kN-m/kg ã Thermal Expansion=12µm/m-K 
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks