Instruction manuals

ABB; Blocks With Gas Discharge, Compression Clamp

Description
Blocks with gas discharge; compression clamp 14 su Low rg e p po ro we te r ct ion M 4/9.PE.90 Spacing 9 mm .354 M 4/9 block equipped with a 3 mm end plate and a gas discharger between two decks. center of rail Color Grey Type M 4/9.PE.90 P/N 1SNA007028R2200 Characteristics Static priming voltage min. nominal max. 75 V 90 V 105 V 730 V Dynamic priming voltage (1 kV / µs) Max. operating voltage DC AC Discharge shock current (8 / 20 µs wave) AC discharge current Capacity pF Residual volt
Published
of 4
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  14 14 L o  w    p o  w  e r  s  u  r   g  e   p r  o  t  e c  t  i  o  n   Low Voltage Products & Systems 14.7  Color Type P/NGrey M 4/9.PE.90 1SNA007028R2200  Characteristics Static priming voltage min. 75 Vnominal 90 Vmax. 105 VDynamic priming voltage 730 V(1 kV / µs)Max. operating voltageDC 70 VAC 50 VDischarge shock current 5 kA(8 / 20 µs wave)AC discharge current 5 A (1s, 50 Hz)Capacity pF ≈ 1 pFResidual voltage with stable arc 10 VVoltage with discharge 75 V Characteristics IECNFC DIN UL CSAScrewSolid wire 0,2-4 mm²Wire sizeStranded wire 0,22-4 mm²Soldered Solid wireStranded wireNominalRated voltage PulsePollution degreeRated current A Nominal 26Rated wire size Nominal / Gauge 4 mm² / A4 Other Characteristics Wire stripping Recommended RecommendedProtectionlength screwdriver torque8,5 mm4 mm0,4-0,6 Nm IP 20.33 3.5-5.3 Ib.in NEMA 1 Accessories Type Part numberSub-assembly for jumper bar BJS9 12 8 poles 1SNA177583R1200(screw+washer+post))IDC Jumper BJS9 12 16 poles 1SNA177584R1300 M 4/9.PE.90 Spacing 9 mm .354 1 These accessories can be used on the lower connection only. 2 Use of these accessories requires the user to cut out the partition. 3 Between e1-m or e2-m. 4 Between e1-e2. 5 Voltage for component. For max. voltage, refer to rated voltage of the partition.center of railM 4/9 block equipped with a 3 mm end plate and a gasdischarger between two decks. Blocks with gas discharge; compression clamp                                                                                                                                                                                            14 14 14.8 Low Voltage Products & Systems   L o  w   p o  w e  r s  u  r g  e   p  r o  t e c  t  i o  n Characteristics  Rated voltage Breakdown voltage Maximum surge current Leakage Stand-offType ± 20% ± 10% VRB (V) I=1mA Clamping voltage current voltage CapacitanceDC (V) AC (V) mini. maxi. 10/1000 µs 8/20 µs IRM VRM (pF)VCL (V) Ipp (A) VCL (V) Ipp (A) (µA) (V)D 4/6.PZ 24/15 24 15 33,3 36,8 48,4 10,3 3 30D 4/6.PZ 48/24 48 24 64,6 71,4 92 6,5 121 59,5 5 58,1 625Note : Given for 600 W in 10/1000 µs and 7,2 kW in 8/20 µs.  Characteristics NFC DIN UL CSA NFC DIN UL CSAWire sizes CompressionSolid wire 0,2-4 mm² 0,2-4 mm²clamp Stranded wire 0,22-4 mm² 0,22-4 mm²Rated voltage V~=Rated current ARated wire size Other Characteristics Wire stripping Recommended Recommended Protection Wire stripping Recommended Recommended Protectionlength screwdriver torque length screwdriver torque9,5 mm 4 mm 0,5-0,8 Nm IP 00 9,5 mm 4 mm 0,5-0,8 Nm IP 00.37 4.4-7.1 Ib.in .37 4.4-7.1 Ib.inR See section on markers marking methodType P/N Type P/NGreen body Green bodyD 4/6.PZ 24/15 24 V DC 1SNA007035R1100 D 4/6.PZ 48/24 24 V AC 1SNA007034R1000 D 4/6.PZ 48/24 48 V DC 1SNA007034R1000Spring-loaded rail contact Spring-loaded rail contact Terminal block style Transzorb diode suppressor Compression clamp D 4/6.PZ.../... DCSpacing 6 mm .236 D 4/6.PZ.../... ACSpacing 6 mm .236 87109R5123-4611  14 14 L o  w    p o  w  e r  s  u  r   g  e   p r  o  t  e c  t  i  o  n   Low Voltage Products & Systems 14.9  Type P/N Type P/NGrey body Green body M 4/9.PZ5/3 5 V DC 1SNA007015R1500 M 4/9.PZ15/12 12 V AC 1SNA007017R1700  M 4/9.PZ12/8 12 V DC 1SNA007016R1600 M 4/9.PZ24/15 15 V AC 1SNA007018R2000  M 4/9.PZ15/12 15 V DC 1SNA007017R1700 M 4/9.PZ35/24 24 V AC 1SNA007019R2100  M 4/9.PZ24/15 24 V DC 1SNA007018R2000 M 4/9.PZ60/48 48 V AC 1SNA007021R1300 M 4/9.PZ48/36 48 V DC 1SNA007020R2600 M 4/9.PZ130/60 60 V AC 1SNA007022R1400 M 4/9.PZ60/48 60 V DC 1SNA007021R1300 M 4/9.PZ187/130 110-130V AC 1SNA007023R1500  M 4/9.PZ130/60 110-130V DC 1SNA007022R1400 M 4/9.PZ348/240 220-240V AC 1SNA007024R1600 Characteristics  Type Rated voltage Breakdown voltage Maximum surge current Leakage Stand-offto ± 20% Clamping voltage current voltage CapacitanceDC (V) AC (V) mini. maxi. 10/1000 µs 8/20 µs IRM VRM (pF)VCL (V) Ipp (A) VCL (V) Ipp (A) (µA) (V)M 4/9.PZ 5/3 5 3 6.45 7.48 10.5 143 13.4 1343 1000 5.8 22000M 4/9.PZ 12/8 12 8 15.2 17.6 22.5 67 28.9 623 5 13.6 7000M 4/9.PZ 15/12 15 12 20.9 24.2 30.6 49 39.3 458 5 18.8 5100M 4/9.PZ 24/15 24 15 31.4 36.3 45.7 33 59 305 5 28.2 3250M 4/9.PZ 35/24 35 24 44.7 51.7 64.8 23.2 84 214 5 40.2 2200M 4/9.PZ 48/36 48 36 64.6 74.8 92 16.3 121 148 5 58.1 1500M 4/9.PZ 60/48 60 48 86.5 100 125 12 162 111 5 77.8 1100M 4/9.PZ 130/60 130 60 161 187 234 6.4 301 60 5 145 600M 4/9.PZ 187/130 187 130 237 275 344 5 442 47 5 213 410M 4/9.PZ 348/240 348 240 418 484 603 3.5 776 33 5 376 240Note : Given for1,5 W in 10/1000 µs and 18 kW in 8/20 µs.  Characteristics NFC DIN UL CSA NFC DIN UL CSA CompressionSolid wire 0,5-4 mm² 0,5-4 mm²Wire sizesclamp Stranded wire 0,5-4 mm² 0,5-4 mm²Rated voltage V~=Rated current A 26 26Rated wire size 4 mm² 4 mm² Other Characteristics Wire stripping Recommended Recommended Protection Wire stripping Recommended Recommended Protectionlength screwdriver torque length screwdriver torque8,5 mm 4 mm 0,4-0,6 Nm IP 20 8,5 mm 4 mm 0,4-0,6 Nm IP 20.33 3.5-5.3 Ib.in NEMA 1 .33 3.5-5.3 Ib.in NEMA 1 Accessories Type P/N Type P/NJumper bar not assembled BJS9 12 8 poles 1SNA177583R1200 BJS9 12 8 poles 1SNA177583R1200BJS9 12 16 poles 1SNA177584R1300 BJS9 12 16 poles 1SNA177584R1300R See section on markersmarking method 1 These accessories can be used on the lower connection only. 2 Use of these accessories requires the user to cut out the partition. Terminal block style Transzorb diode suppressor Compression clampSeries 7 000; Compression clamp, DIN 1-3                                                                                                                                                                                            M 4/9 block equipped with a 3 mm end plate and a bidirectio-nal silicon transient voltage suppressor between two decks.M 4/9 block equipped with a 3 mm end plate and a bidirectio-nal silicon transient voltage suppressor between two decks. M 4/9.PZ.../... 5 to 130 V DCSpacing 9 mm .354 M 4/9.PZ.../... 12 to 240 V ACSpacing 9 mm .354 87109R5123-4611  14 14 14.10 Low Voltage Products & Systems   L o  w   p o  w e  r s  u  r g  e   p  r o  t e c  t  i o  n M 4/9 block equipped with a 3 mm end plate and a bidirectionalmetal oxide transient voltage suppressor between two decks.M 4/9 block equipped with a 3 mm end plate and a bidirectionalmetal oxide transient voltage suppressor between two decks. Type P/N Type P/NGrey body Green body M 4/9.PV 5/4 5 V DC 1SNA007004R2300 M 4/9.PV 15/12 12 V AC 1SNA007006R2500M 4/9.PV 12/8 12 V DC 1SNA007005R2400 M 4/9.PV 24/15 15 V AC 1SNA007007R2600M 4/9.PV 15/12 15 V DC 1SNA007006R2500 M 4/9.PV 35/24 24 V AC 1SNA007008R0700M 4/9.PV 24/15 24 V DC 1SNA007007R2600 M 4/9.PV 60/48 48 V AC 1SNA007010R2400 M 4/9.PV 48/35 48 V DC 1SNA007009R0000 M 4/9.PV 130/60 60 V AC 1SNA007011R1100 M 4/9.PV 60/48 60 V DC 1SNA007010R2400 M 4/9.PV 165/110 110 V AC 1SNA007012R1200M 4/9.PV 130/60 110-130 V DC 1SNA007011R1100 M 4/9.PV 270/130 130 V AC 1SNA007013R1300M 4/9.PV 508/240 220-240V AC 1SNA007014R1400Protection in ZONE 2 Protection in ZONE 2 Characteristics  Max. operating Max. impulse current with Varistor voltage at 1 mA DC Peak clamping voltageType voltage an 8/20 µs current wave test current with 8/20 µs waveCapacitanceDC (V) AC (V) ( A ) min. ( V ) max. ( V ) Vc ( V ) Ip ( A )(pF)M 4/9.PV 5/4 5.5 4.2 250 6 11 20 5 12000M 4/9.PV 12/8 14 10 500 14.4 21.6 39 5 6000M 4/9.PV 15/12 22 17 500 23 31.1 53 5 4000M 4/9.PV 24/15 26 20 500 29.5 36.5 64 5 3500M 4/9.PV 35/24 38 30 500 42 52 89 5 2500M 4/9.PV 48/35 56 40 500 61 75 123 5 1800M 4/9.PV 60/48 81 60 2500 90 110 165 25 900M 4/9.PV 130/60 153 115 2500 162 198 300 25 550M 4/9.PV 165/110 180 140 2500 198 242 360 25 480M 4/9.PV 270/130 300 230 2500 324 396 595 25 300M 4/9.PV 508/240 560 420 2500 610 748 1120 25 220 Note : Average power dissipation of transient not to exceed 0.4 W.  Characteristics DIN-VDE UL CSA NFC-UTESolid wire 0-4 mm² 0-4 mm² 0-4 mm² 0-4 mm²Wire sizesStranded wire 0-4 mm² 0-4 mm² 0-4 mm² 0-4 mm²Rated voltage V~=Rated current A 26 30 26 30Rated wire size 4 mm² 2.5 mm² 4 mm² 2.5 mm² Other Characteristics Wire stripping DIA. Wire stripping DIA.length screwdriverTorque Protectionlength screwdriverTorque Protection8.5 mm 4 mm 0.4-0.6 Nm IP 20 8.5 mm 4 mm 0.4-0.6 Nm IP 20.33 3.5-5.3 Ib.in NEMA 1 .33 3.5-5.3 Ib.in NEMA 1Approvals (Contact Entrelec) Accessories Type P/N Type P/N Jumper bar BJS9 12 8 poles 1SNA177583R1200 BJS9 12 8 poles 1SNA177583R1200(not preassembled) BJS9 12 16 poles 1SNA177584R1300 BJS9 12 16 poles 1SNA177584R1300R See marking section 1 These accessories can be used on the lower connection only. (2) Use of these accessories requires the user to cut out the partition. 2 M 4/9.PV.../... 5 to130 V DCSpacing 9 mm .354 M 4/9.PV.../... 12 to 240 V ACSpacing 9 mm .354 center of rail Terminal block style varistor Blocks with varistorSeries 7 000                                                                                                                                                                                           87109R5123-4611
Search
Similar documents
View more...
Tags
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks