Documents

Abs 0973

Description
Abs 0973
Categories
Published
of 13
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
     ABS0973 Issue 4 Page 1 of 13 October 2006  Aerospace series Contact, electrical, quadrax, size 8, pin, type D, crimp Copyright reserved Ref. no. ABS0973 Published and distributed by :  AIRBUS INDUSTRIE ENGINEERING DIRECTORATE 31707 BLAGNAC Cedex FRANCE    AIRBUS ®     Published and distributed by :  AIRBUS S.A.S. ENGINEERING DIRECTORATE 31707 BLAGNAC Cedex FRANCE  “When this standard is applied, a careful check must be made as to whether any protective rights exist. This standard issuer hereby disclaims any liability for infringement of patent or design rights resulting from the use of this standard     ABS0973 Page 2 Issue 4 Contents 1   Scope   2   Normative references   3   Requirements   4   Designation   5   Marking   6   Technical specification      ABS0973 Page 3 Issue 4 1 Scope This standard specifies the dimensions, tolerances, required characteristics and the mass of an electrical contact, quadrax, size 8, pin, type D, crimp, class P. It shall be used with EN3155-001. The associated socket contacts are defined in ABS0974. This contact is to be used with ABS0972 and ABS1503 cables. 2 Normative references This Airbus Standard incorporates by dated or undated reference provisions from other publications. All normative references cited at the appropriate places in the text are listed hereafter. For dated references, subsequent amendments to or revisions of any these publications apply to this Airbus Standard only when incorporated in it by amendment of revision. For undated references, the latest issue of the publication referred to shall be applied. EN2424 Aerospace series - Marking of aerospace products. 1  EN2591-100 Aerospace series - Elements of electrical and optical connection - Test methods - General. 1 EN2997-001 Aerospace series - Connectors, electrical, circular, coupled by threaded ring – Part 001: Technical specification. 1  EN3155-001 Aerospace series - Electrical contacts used in element of connection - Part 001: Technical specification. 1  EN3475-100 Aerospace series – Cables, electrical, aircraft use – Test methods - Part 100: General. 1  EN3545-004 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to +175 °C – Part 004: Connectors with male contacts – Product standard. 1  TR6058 Aerospace series - Cable code identification list. 2   ABS0074 Aerospace series – Contact electrical, identification list.  ABS0972 Aerospace series - Cable, electrical quadrax, for digital data transmission, +200 °C max.  ABS0974 Aerospace series - Contact, electrical, quadrax, size 8, socket, type D, crimp.  ABS1054-003 Aerospace series - Circular, connectors, receptacles, bayonet coupling.  ABS1054-004 Aerospace series - Circular, connectors, plugs, bayonet coupling.  ABS1340 Aerospace series – Connectors, electrical, circular, plug, with backshell, coupled by threaded ring, operating temperature +200 °C continuous, +260 °C peak.  ABS1343 Aerospace series – Connectors, electrical, circular, plug, with backshell, coupled by threaded ring, operating temperature +175 °C continuous.  ABS1426 Aerospace series – Connectors, electrical, circular, receptacle, with backshell, coupled by threaded ring, operating temperature +175 °C continuous.  ABS1427 Aerospace series – Connectors, electrical, circular, receptacle, with backshell, coupled by threaded ring, operating temperature +200 °C continuous, +260 °C peak.  ABS1437 Aerospace series - Vibration requirements on equipment to cover the sustained engine imbalance, fan blade out event - Test method - Windmilling case.  ABS1503 Aerospace series - Cable, electrical, shielded quad, for digital data transmission, severe EMI conditions, +200 °C.  AIPS07-05-043 Airbus Process Specification – Installation of quadrax contact ABS0973/0974. 1  Published as AECMA Standard at the date of publication of this standard 2   Published as AECMA Technical report at the date of publication of this standard      ABS0973 Page 4 Issue 4  ASNE0162 Rectangular, connectors, ARINC 600, size 2, receptacles.  ASNE0163 Rectangular, connectors, ARINC 600, size 2, plugs.  ASNE0164 Rectangular, connectors, ARINC 600, size 3, receptacles.  ASNE0165 Rectangular, connectors, ARINC 600, size 3, plugs. MIL-C-22520/2 Crimping tools terminal, hand, wire, termination for wire barrel sizes 20 through 28. 3  MIL-C-22520/5 Crimping tools terminal, hand, wire, termination, large for coaxial, shielded contacts and ferrules, terminal lugs, splices and end caps. 3  MIL-DTL-22520 Crimping tools, wire termination, general specification for. 3  MIL-I-81969/14C Sheet installing and removal tools, connector electrical contact, type III, class 2, composition B. 3   3 Requirements 3.1 Configuration, dimensions, tolerances and mass The configuration, dimensions and tolerances shall be in accordance with figures 1 and 2 and table 1. Mass of the contact : 10 g max. Dimensions apply after surface treatment. Dimensions in millimeter. Figure 1: Configuration, dimensions and tolerances of pin outer body 3   Published by: Department of Defense (DoD), the Pentagon, Washington, D.C., 20307, USA   Ø 0,50ABC    Ø    0 ,   6   2   2   t  o   0 ,   6   4   8  AB12,82 to 13,0811,85 to 12,3030,0 max.0,74 to 0,84 r   0   , 3  0   m  i   n  .  9,0 min.    Ø    4 ,   7   0   t  o   4 ,   8   0   Ø    5 ,   5   1   t  o   5 ,   5   6   Ø    0 ,   1   2   A   B   Ø    0 ,   0   5   B   Ø    6 ,   9   3   t  o   7 ,   0   1 1,85 to 1,90CØ 0,05B r     4     , 6    5      t    o    4     , 7     5         4 ,   7   0 Ø 7,95 to 8,03    2 ,   8   2   1 ,   4   1 1,412,82
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks