Documents

Read me.txt

Description
Description:
Categories
Published
of 16
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Transcript
  -=[Follow Me]=-Facebook : https://www.facebook.com/SceneDLTorrentsTwitter : https://twitter.com/SceneDL_WorldBlogger : http://scenedlworld.blogspot.com/Forum : http://scenedl.box.sx/##############################1. Recovery2. Genuine status3. Questions and answers4. UEFI motherboards5. Server 2012 (R2) compatibility6. Checksums7. Changes8. Arguments9. Extra########################################################################### 1 - Recovery##########################################################################Is Windows failing to boot after you installed the loader? Just do the following.* Boot up the PC from your Windows installation disk* Press and hold SHIFT and then press F10* Input bootsect.exe /nt60 SYS /force (without quotes)* Restart the PCNote: If the above doesn't fix your boot issue then use the command bootsect.exe /nt60 ALL /force instead. Just make sure you remove all USB flash drives before you use the command.Alternatively try holding the 'R' key after your BIOS screen. If you time it right then you'll see a boot menu. From the menu select to boot without a SLIC.########################################################################### 2 - Genuine status##########################################################################Have you installed the loader but you're not genuine? Just check the following.* Check the details line contains v2.1 , v2.2 or v2.3 * Try to validate online with Internet Explorer at http://www.microsoft.com/genuine/validate/Note: If the details line doesn't read v2.1, v2.2 or v2.3 then go to the advanced tab, select to disable type 4 memory and reinstall the loader. If that doesn't workthen use the legacy setting instead.########################################################################### 3 - Questions and answers  ##########################################################################Q. The loaders status says Modified - Uninstall other cracks , what do I do?A. You can either find a way to uninstall the other cracks, download WAT Fix or format. http://forums.mydigitallife.info/threads/26994Q. Why did I lose activation after I allowed Windows to run startup repair?A. Startup repair will write a new boot sector. To prevent this use the following command from command prompt as an administrator bcdedit /set {default} bootstatuspolicy ignoreshutdownfailures Q. I dual boot with Windows 8 and the loaders not working for me, so how do I fix it?A. Boot to Windows 8 and enter the following command from command prompt as an administrator bcdedit /set {default} bootmenupolicy legacy Q. I installed the loader and I'm still not activated, so what do I do now?A. Go to the loaders advanced options tab and select to either either disable type 4 memory or use the legacy setting, then press install and reboot when prompted. You may also need to select the option to ignore the systems existing SLIC and/or revalidate online.Q. The loaders status says Unsupported partition table , why is this?A. You're either using GPT on a UEFI motherboard or you've got a locked OEM partition. Both problems can be fixed by fully formatting your entire hard drive.Q. I received the error message Error finding your systems active partition , whatdo I have to do?A. You need to format the whole hard drive with a program like Active@ Kill Disk. This issue is caused by your locked OEM partition. http://software.lsoft.net/boot-cd-iso.zipQ. I received the error message Failed to add loader to the boot code , what do I have to do?A. Disable any system protection. Some types of software block the loader application from installing to the boot code.Q. I've used a version of the loader before and it failed to work, what do I have to do?A. If you previously used bootsect to get back into Windows then you first need to press uninstall, reboot and then install the newest version of the loader.Q. I've previously used another activation solution and I think it's modified my systems files, can I fix it?A. You can first try to uninstall what you srcinally installed and then try running sfc.exe /scannow from command prompt as an administrator.Q. I lose activation status after my systems been to sleep or has been in hibernation, can I fix it?A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you're not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.Q. I installed the loader and my system hangs during the boot process, can I fix it?A. Go to the advanced options and select to disable type 4 memory, install the loader again and see if that cures it. If you're not cured try to disable type 3 memory instead. If it still fails try selecting the legacy setting.Q. I installed the loader and rebooted but I'm not activated. The loader  application displays the message BAD SLIC SIZE or BAD SLIC DATA , can I fix it?A. Uninstall the loader, power down and then boot up the system again. Go to the applications advanced options and select to ignore the existing SLIC and then pressinstall and reboot when prompted.Q. My systems UEFI, but I've formatted the drive to use MBR and I'm still not activated. What do I do?A. Check your UEFI menu for secure boot and make sure it's disabled.########################################################################### 4 - UEFI motherboards##########################################################################The loader doesn't work when the systems using GPT. The workaround is to pre-formatyour hard drive so that it uses MBR instead.From your BIOS select to boot the Windows DVD without UEFI, press and hold SHIFT and then press F10 and then enter this:diskpartlist diskselect disk 0cleanconvert mbrcreate partition primaryselect partition 1format fs=ntfs quickBoot the Windows DVD the same way you did the first time and then continue with theinstallation of Windows. Once complete you can then install the loader.To forcefully boot Windows 7 without UEFI you can use the Windows 7 USB/DVD Download Tool. Once the USB is created just delete bootmgr.efi from the USB and then try to boot from it.########################################################################### 5 - Server 2012 (R2) compatibility##########################################################################Starting with the Server 2012 range Microsoft requires the RSDP to be in read only memory. Because of this there are limitations.* Systems with an existing SLIC in their BIOS should have success* Systems with an Intel CPU may have success due to chipset lock picking* Systems with an AMD CPU may struggle to gain activation status if they don't havean existing SLIC in their BIOS* If the loaders details line contains v2.3 or v2.2 but your systems not activated then your systems probably not compatible======To convert Windows Server 2012 from an evaluation edition you must use the following command:DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula  Here's two examples:DISM /online /Set-Edition:ServerDatacenter /ProductKey:B7RRX-RVN4P-PCPBM-89D8Y-X4PQH /AcceptEulaDISM /online /Set-Edition:ServerStandard /ProductKey:VDNYM-JBKJ7-DC4X9-BT3QR-JHRGY /AcceptEulaYour system may then need to reboot 2 times before the loader will work.======########################################################################### 6 - Checksums##########################################################################File : Windows Loader.exeCRC-32 : b4417bb9MD4 : 10cc300f6c7b1b0fe8fcf5d9cfd07e15MD5 : 323c0fd51071400b51eedb1be90a8188SHA-1 : 0efc35935957c25193bbe9a83ab6caa25a487ada########################################################################### 7 - Changes##########################################################################Version 2.2.2* Added support for Windows Server 2012 R2 operating systems* Added a valid OEM SLP key for Windows Server 2012 R2 Standard (it was taken from a Dell server)* Added a warning for virtual machines created in VirtualBox that are using WindowsServer 2012 or 2012 R2 (use ICH9 for the loader to work)* Allowed the loader to be installed onto Xen again (if it doesn't work for you then it can't be fixed)* Added lots of new keys, SLIC's and certificates* Cleaned up the UI* Other minor tweaks and fixesVersion 2.2.1* Added a new GRLDR* Redesigned the advanced options tab and added an option to relocate the RSDP to the EBDA* Added Seneca and Twinhead Windows 7 Professional keys* Added BenQ Windows 7 Home Premium key* Added Seneca SLIC and certificate* Other minor tweaks and fixesVersion 2.2* Fixed Xen detection* Fixed a small issue with some decoded keys* Pressing the delete key will now remove the OEM picture* Other minor tweaks and fixesVersion 2.1.9* Added a new GRLDR* Blocked the loader from installing onto Xen as it's not supported* Added notes about Windows Server 2012 and Windows 8 to the read me fileVersion 2.1.8
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x