Documents

BS EN 1559-1-2011 Founding- Technical Conditions of Delivery.pdf

Description
Description:
Categories
Published
of 28
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Transcript
  raising standards worldwide ™ NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS EN 1559-1:2011 Founding — Technicalconditions of delivery Part 1: General  BS EN 1559-1:2011BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 1559-1:2011. Itsupersedes BS EN 1559-1:1997 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ISE/111, Steel Castings and Forgings.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication.© BSI 2011ISBN 978 0 580 67228 6ICS 77.140.80; 77.150.01 Compliance with a British Standard cannot confer immunity fromlegal obligations. This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2011. Amendments issued since publication DateText affected  BS EN 1559-1:2011   EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM   EN 1559-1 February 2011 ICS 77.180   Supersedes EN 1559-1:1997 English Version Founding - Technical conditions of delivery - Part 1: General Fonderie - Conditions techniques de fourniture - Partie 1: Généralités Gießereiwesen - Technische Lieferbedingungen - Teil 1:  Allgemeines This European Standard was approved by CEN on 15 January 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1559-1:2011: E  BS EN 1559-1:2011 EN 1559-1:2011 (E) 2 Contents Page   Foreword ..............................................................................................................................................................3   Introduction .........................................................................................................................................................4   1   Scope ......................................................................................................................................................5   2   Normative references ............................................................................................................................5   3   Terms and definitions ...........................................................................................................................6   4   Information to be supplied by the purchaser .....................................................................................8   4.1   Mandatory information ..........................................................................................................................8   4.2   ●●  Optional information .......................................................................................................................8   4.3   Drawings, patterns and tools ...............................................................................................................9   4.4   ●●  Information on the mass .............................................................................................................. 10   4.5   ●●  Preliminary sample....................................................................................................................... 10   4.6   ●●  Initial sample ................................................................................................................................. 10   5   Designations ....................................................................................................................................... 10   6   Manufacture ......................................................................................................................................... 11   6.1   ●●  Manufacturing process ................................................................................................................ 11   6.2   Welding operations............................................................................................................................. 11   7   Requirements ...................................................................................................................................... 12   7.1   General ................................................................................................................................................. 12   7.2   Material ................................................................................................................................................ 12   7.3   Casting ................................................................................................................................................. 12   8   Inspection ............................................................................................................................................ 14   8.1   General ................................................................................................................................................. 14   8.2   Type of inspection documents and type of inspection .................................................................. 14   8.3   Test unit ............................................................................................................................................... 15   8.4   Samples ............................................................................................................................................... 16   8.5   Test procedures ................................................................................................................................. 16   8.6   Invalidation of test results ................................................................................................................. 17   8.7   Retests ................................................................................................................................................. 17   8.8   Sorting and reprocessing .................................................................................................................. 18   9   Marking ................................................................................................................................................ 18   10   Packaging and surface protection .................................................................................................... 18   11   Complaints .......................................................................................................................................... 18   Annex A (normative)  Mandatory and/or optional information checklist .................................................... 19   Annex B (informative)  Significant technical changes between this European Standard and the previous edition .................................................................................................................................. 22   Bibliography ..................................................................................................................................................... 23  
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x