Documents

GJS(06)C Fiber Optic Closure Manual

Description
Description:
Categories
Published
of 3
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Transcript
    GJS(06)C Fiber Optic Closure Manual Introduction 1.application This product integrates the fuction of distirbution with splitting,suitabel for the straight through or branch connection,and distrubtion connection in optical ststem,as well as protection connection for cabels and distribution pigtails It ’ s designed as the three layers structure,used for splitting and splicing,with the middle panel ≥180  Easy for installation and maintenance.   The middle panel is optional for different users,without it,it could be used as a splice closure. Splicing Splitting ( For tube PLC )  Splitting ( sub-rack PLC )  2. Specification    High impact plastic,standard user interface,repeated    Suitable for 2x1:8 sub-rack PLC splitter,or 2pcs of tube PLC splitter    Anti-UV,shocking resistance,and waterproof    Unique middle panel ≥180°, clear area for splicing and distribution,less cross-connection for cables    Suitable for un-cut cables   Model Dimension ( mm )  Cable diameter ( mm )  Cable ports Splitting ratio Tray quatity Max capacity GJS(06)C (Splitting) 290*190*110 4/16 1 : 16 ( 1pc )  1:8(2pc) 1 24 single cores Model Dimension ( mm )  Cable diameter ( mm )  Cable ports Max capacity/one tray Tray quantity Max capacity GJS(06)C (Splicing) 290*190*90 2 in 2 out 24(single cores) 3 72  single cores      Operation manual 1. Open the box,install the sub-rack PLC splitter by band as picture 2. Strip and clean the cable, keep it 1.6m long and 30-50mm long of the strength member, and insert cable through inlet,fix it by cable clamp,and fix strength member by special clamp. Put the cable in the splice tray,and patch the excess cable in the bottom. 3.   Put the input of PLC splitter in the tray and splice with pigtail,install the PVC cover. 4.   Plug the outgoing pigtails,and install the pigtails in the rubber slot,and fix it by sealing rubber. 5.Close the cover by clips.    Pag e 2 6.Splicing: Strip and clean the cable, keep it 1.6m long and 30-50mm long of the strength member. Take the cable to the inlet,fix it by cable clamp,and fix the strength member by special clamp. Put the cable in the splice tray,and splice, patch the excess cable in the bottom. . Techinical data    Fiber bend radius :≥40mm      Splicet tray excess loss : ≤0.01dB      Temperature Range   : - 40 ℃     + 60 ℃      Anti lateral pressure : ≥2000N / 10 cm      Shock resistance : ≥20N.m      IP65 Packing list Body 1 set L=400mm protection tube 1 pc Cable clamp 4 pcs 3x100 cable tie 26 pcs Heat shrink tube L=60 2~72 pcs ( as per requested )   Hanging bracket/wall mount bracket 2 sets/1 set ( optional )  
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x