Documents

installation-manual-of-GP-80.pdf

Description
Description:
Categories
Published
of 37
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Transcript
  INSTALLATION MANUAL GPS NAVIGATOR GP-80 1. EQUIPMENT LIST............................................................................................1 2. DISPLAY UNIT..................................................................................................2 3. ANTENNA UNIT................................................................................................3 4. WIRING.............................................................................................................5 5. INITIAL SETTINGS...........................................................................................7 6. OPTIONAL DGPS...........................................................................................21 PACKING LISTS AND INSTALLATION MATERIALS OUTLINE DRAWINGS INTERCONNECTION DIAGRAM Back   Your Local Agent/Dealer Your Local Agent/Dealer 9-52 Ashihara-cho,9-52 Ashihara-cho,Nishinomiya, JapanNishinomiya, JapanTelephone :Telephone :0798-65-21110798-65-2111faxfax0798-65-42000798-65-4200:: IRST EDITION :IRST EDITION :SEP.SEP.19951995 Printed in JapanPrinted in Japan All rights reserved. All rights reserved. Q1Q1::OCT.OCT.06,200306,2003 PUB.No.PUB.No.IME-43740-Q1IME-43740-Q1 *00080734101**00080734101* ((TENITENI)) GP-80GP-80 * 0 0 0 8 0 7 3 4 1 0 1 ** 0 0 0 8 0 7 3 4 1 0 1 * *IME43740Q10**IME43740Q10*   *IME43740Q10**IME43740Q10* * I M E 4 3 7 4 0 Q 1 0 ** I M E 4 3 7 4 0 Q 1 0 *  SAFETY INSTRUCTIONS W RNING Do not work inside the equipment unless totally familiar with electrical circuits. Hazardous voltage which can cause electrical shock, burn or serious injury exists inside the equipment. Turn off the power at the mains switchboard before beginning the installation.Post a sign near the switch to indicate it should not be turned on while the equip-ment is being installed. Fire, electrical shock or serious injury can result if the power is left on or is applied while the equipment is being installed. Ground the equipment toprevent electrical shockand mutual interference.Confirm that the power supply voltageis compatible with the voltage ratingof the equipment. Connection to the wrong power supply can cause fire or equipment damage. Thevoltage rating appears on the label at therear of the display unit. Use the correct fuse. Use of a wrong fuse can cause fire orequipment damage. Keep the following compass safe distances:  Standard Steering Display unit 0.6 m 0.5 m UTION     1 1. EQUIPMENT LIST Standards Name   Type   Q'ty   Mass(kg)   Remarks   GPA-017S GPA-018S 1 Antenna Unit  GPA-019S 1 for DGPS GPR-020   Without Beacon RX  2 Display Unit   GPR-020  1 2.2 With Beacon RX   CP20-01900  3 Installation Materials   CP20-01920  1 set See lists at end of manual.  4 Spare Parts   SP20-00500  1 set Options Name   Type   Code No.   Remarks   1 Flush Mount Kit S   OP20-24   004-393-000  2 Flush Mount Kit F OP20-25 004-393-280 For display unit.   CP20-01700 004-372-110 3 Antenna Cable Set CP20-01710 004-372-120 See page 3.  4 Right Angle Antenna Base No.13-QA330 000-803-239 5 L-Type Antenna Base No.13-QA310 000-803-240 6 Handrail Antenna Base No.13-RC5160 000-806-114 7 Mast Mount Kit CP20-01111 004-365-780 For antenna unit.  8 Cable Assy MJ-A6SPF0011-050 (03S9202) 000-132-244 5m, 6p-4p   MJ-A6SPF0011-100 (03S9226) 000-132-336 10m, 6p-4p MJ-A7SPF0003-050 (20S0241) 000-136-730 5m, For DATA4 20S0093 000-117-603 5m, MJ type 6P MJ-A6SPF0012-050 (64S4073) 000-134-424 Cross cable 5m MJ-A6SPF0012-100 (64S4071) 000-133-817 Cross cable 10m 9 Beacon Receiver Set GR-800 – 10 Rectifier PR-62 000-013-485 For 100VAC mains 000-013-486 For 220VAC mains
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x