Documents

SSH_Komm.pdf

Description
Description:
Categories
Published
of 220
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Transcript
  SIMATIC SIMATIC Communication with SIMATIC  ______________  ______________  ______________  ______________  ______________  ______________  ______________  ______________  ______________  ______________  ______________    Preface Introduction 1 PROFINET / Industrial Ethernet 2 Industrial Wireless LAN 3 PROFIBUS 4 AS-Interface 5 Wide Area Network (WAN) 6 Multi-Point Interface (MPI) 7 Point-to-Point Interface (PPI)   8 Point-to-Point 9 KNX/EIB (KONNEX) 10 Configuration and Parameter Assignment Tools 11 SIMATIC Communication with SIMATIC System Manual 09/2006 EWA 4NEB 710 6075-02 04 The following supplement is part of this documentation: No. Designation 1 Brochure Industrial Communication for Automation    Safety Guidelines This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. Danger indicates that death or severe personal injury will  result if proper precautions are not taken. Warning indicates that death or severe personal injury may  result if proper precautions are not taken. aution with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken. aution without a safety alert symbol, indicates that property damage can result if proper precautions are not taken. Notice indicates that an unintended result or situation can occur if the corresponding information is not taken into account. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The device/system may only be set up and used in conjunction with this documentation. Commissioning and operation of a device/system may only be performed by qualified personnel . Within the context of the safety notes in this documentation qualified persons are defined as persons who are authorized to commission, ground and label devices, systems and circuits in accordance with established safety practices and standards. Prescribed Usage Note the following: Warning This device may only be used for the applications described in the catalog or the technical description and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as well as careful operation and maintenance. Trademarks All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Automation and Drives Postfach 48 48 90437 NÜRNBERG GERMANY Order No.: EWA 4NEB 710 6075-02 04 09/2006 Copyright © Siemens AG 2006. Technical data subject to change    Communication with SIMATIC System Manual, 09/2006, EWA 4NEB 710 6075-02 04 iii   Preface Preface SIMATIC products allow control solutions for a variety of industries and requirements. A key element in the success of the SIMATIC products is the ability of the different hardware platforms to communicate seamlessly over different networks--sharing information quickly and efficiently. Purpose of this manual The Communication with SIMATIC System Manual provides a general overview of the communication networks and communication technologies that are used in the automation field. The emphasis is on the SIMATIC product line and the network protocols it supports. This manual is based on the brochure Industrial Communication for Automation and extends the technical facts. The manual also specifies the available configuration tools and refers to further information. The manual offers the following opportunities: ●   Introduction into the communication technologies ●   Basis for decision-taking and planning for the various networks ●   Navigation aid within the documentation structure in the SIMATIC environment However, more detailed descriptions of the SIMATIC products and instructions on the concrete structuring of communication networks are not contained. This information is provided in the corresponding product-oriented manuals. Required Background It is advantageous if you already have a general knowledge of networks and automation technology and are familiar with the brochure Industrial Communication for Automation . No specific knowledge of communication theory is required. Basic knowledge about communication, for example about network topology and the 7-layer ISO/OSI reference model, is recommended Scope of This Manual This manual applies for the SIMATIC product line. Changes compared to the previous version The decisive change compared to the previous version is the improved structuring of the contents. In this new manual the contents are provided classified by the networks. The chapters for the respective networks have a uniform substructure.  Preface Communication with SIMATIC iv  System Manual, 09/2006, EWA 4NEB 710 6075-02 04 Audience This manual is intended for the following target groups who plan and design networked automation solutions with SIMATIC products: ●   Decision makers ●   Planner ●   Designers Commissioning engineers and the service personnel will also profit from the manual. Further Support Please talk to your Siemens contact at one of our agencies or local offices if you have any questions about the products described here and do not find the answers in this manual. ●   You will find your contact partner at: http://www.siemens.com/automation/partner  ●   You will find the pointer to the offering of technical documentation for the individual SIMATIC products and systems at: http://www.siemens.de/simatic-doku ●   You will find the online catalog and the online ordering system at: http://mall.automation.siemens.com/  Training Center We offer various courses for newcomers to the SIMATIC S7 automation system. Please contact your regional Training Center, or the central Training Center in D90327 Nuremberg. ●   Phone: +49 (911) 895-3200 ●   Internet: http://www.sitrain.com  Technical Support You can contact the Technical Support for all the A&D products by means of the Web form for the support request: ●   Internet: http://www.siemens.de/automation/support-request ●   Phone: + 49 180 5050 222 ●   Fax: + 49 180 5050 223 For further information on our Technical Support can be found on the Internet under http://www.siemens.de/automation/service 

Philips

Sep 22, 2019

DENR VS YAP

Sep 22, 2019
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x