Documents

670_388-21.pdf

Description
User’s Manual Cycle Programming iTNC 530 NC Software 340 490-06, 606 420-01 340 491-06, 606 421-01 340 492-06 340 493-06 340 494-06 English (en) 6/2010 About this Manual About this Manual The symbols used in this manual are described below. This symbol indicates that important information about the function described must be considered. This symbol indicates that there is one
Categories
Published
of 513
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  User’s ManualCycle Programming iTNC 530 NC Software340 490-06, 606 420-01340 491-06, 606 421-01340 492-06340 493-06340 494-06English (en)6/2010  HEIDENHAIN iTNC 530 3     A   b  o  u   t   t   h   i  s   M  a  n  u  a   l About this Manual The symbols used in this manual are described below. Would you like any changes, or have you found any errors? We are continuously striving to improve documentation for you. Please help us by sending your requests to the following e-mail address: tnc-userdoc@heidenhain.de .This symbol indicates that important information about the function described must be considered.This symbol indicates that there is one or more of the following risks when using the described function:  Danger to workpiece  Danger to fixtures  Danger to tool  Danger to machine  Danger to operatorThis symbol indicates that the described function must be adapted by the machine tool builder. The function described may therefore vary depending on the machine. This symbol indicates that you can find detailed information about a function in another manual.  4      T   N   C   M  o   d  e   l ,   S  o   f   t  w  a  r  e  a  n   d   F  e  a   t  u  r  e  s TNC Model, Software and Features This manual describes functions and features provided by TNCs as of the following NC software numbers.The suffix E indicates the export version of the TNC. The export version of the TNC has the following limitations:  Simultaneous linear movement in up to 4 axes HSCI  (HEIDENHAIN Serial Controller Interface) identifies the new hardware platform of the TNC controls. HeROS 5  identifies the new operating system of HSCI-based TNC controls.The machine tool builder adapts the usable features of the TNC to his machine by setting machine parameters. Some of the functions described in this manual may therefore not be among the features provided by the TNC on your machine tool.TNC functions that may not be available on your machine include:  Tool measurement with the TTPlease contact your machine tool builder to become familiar with the features of your machine. TNC modelNC software number iTNC 530340 490-06iTNC 530 E340 491-06iTNC 530340 492-06iTNC 530 E340 493-06iTNC 530 programming station340 494-06 TNC modelNC software number iTNC 530, HSCI and HeROS 5606 420-01iTNC 530, HSCI and HeROS 5606 421-01
Search
Tags
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks