Instruction manuals

Amateur_IC-2200H Instruction Manual

Description
MANUAL OPERACIONAL DO ICOM-2200H
Published
of 108
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  INSTRUCTION MANUAL i2200H VHF TRANSCEIVER This device complies with Part 15 of the FCC rules. Operation is sub- ject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.  i FOREWORD Thank you for purchasing this Icom product. The IC-2200H VHF TRANSCEIVER is designed and built with Icom’s superiortechnology and craftsmanship. With proper care, this productshould provide you with years of trouble-free operation. We want to take a couple of moments of your time to thankyou for making your IC-2200H your radio of choice, and hopeyou agree with Icom’s philosophy of “technology fi rst.” Manyhours of research and development went into the design ofyour IC-2200H. D  FEATURES  ❍ 65W* — high transmit output power  (except Korea/Taiwan versions) ❍ Tone squelch, DTCS squelch standard  ❍ Dual color (amber & green) LCD backlight  ❍ Remote control microphone available  (optional for some versions) ❍ Optional Digital modulator/demodulator  ❍ Optional DTMFdecoder  IMPORTANT READ ALL INSTRUCTIONS carefully and completelybefore using the transceiver. SAVE THIS INSTRUCTION MANUAL— This in-struction manual contains important operating instructions forthe IC-2200H. EXPLICITDEFINITIONS   WORD DEFINITION R WARNING!CAUTIONNOTE Personal injury, fi re hazard or electric shockmay occur.Equipment damage may occur.Recommended for optimum use. No risk ofpersonal injury, fi re or electric shock. Icom, Icom Inc. and the logo are registered trademarks of IcomIncorporated (Japan) in the United States, the United Kingdom, Ger-many, France, Spain, Russia and/or other countries.  ii R WARNING RF EXPOSURE! This device emitsRadio Frequency (RF) energy. Extreme caution should be ob-served when operating this device. If you have any questions re-garding RF exposure and safety standards please refer to theFederal Communications Commission Of fi ce of Engineering andTechnology’s report on Evaluating Compliance with FCC Guide-lines for Human Radio frequency Electromagnetic Fields (OETBulletin 65) R WARNING! NEVER connect the transceiver to an ACoutlet. This may pose a fi re hazard or result in an electric shock. R WARNING! NEVER operate the transceiver while dri-ving a vehicle. Safe driving requires your full attention—anythingless may result in an accident. NEVER connect the transceiver to a power source of morethan 16 V DC. This will ruin the transceiver. NEVER connect the transceiver to a power source using re-verse polarity. This will ruin the transceiver. NEVER cut the DC power cable between the DC plug andfuse holder. If an incorrect connection is made after cutting, thetransceiver may be damaged. NEVER expose the transceiver to rain, snow or any liquids.The transceiver may be damaged. NEVER operate or touch the transceiver with wet hands. Thismay result in an electric shock or ruin the transceiver. NEVER place the transceiver where normal operation of thevehicle may be hindered or where it could cause bodily injury. DO NOT push the PTTwhen not actually desiring to transmit. DO NOT allow children to play with any radio equipment con-taining a transmitter.During mobile operation, DO NOT operate the transceiverwithout running the vehicle’s engine. When the transceiver’spower is ON and your vehicle’s engine is OFF, the vehicle’s bat-tery will soon become exhausted. BE CAREFUL! The transceiver will become hot when op-erating it continuously for long periods. AVOID placing the transceiver against walls or putting any-thing on the top of the transceiver. This will obstruct heat dissi-pation. AVOID using or placing the transceiver in direct sunlight or inareas with temperatures below –10°C (+14 ˚ F) or above +60°C(+140 ˚ F). AVOID the use of chemical agents such as benzine or alcoholwhen cleaning, as they can damage the transceiver’s surfaces. USE Icom microphones only (supplied or optional). Other man-ufacturer’s microphones have different pin assignments and maydamage the transceiver if attached. PRECAUTION
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks