Documents

catalog_medicale_en.pdf

Description
2 Main catalogue part 2 Hospital engineering BENDER Group 2.0 Main catalogue part 2 Hospital engineering Edition 07.2009 Further information on other product ranges : Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 65 Subject to change! – © Dipl.-Ing. W. Bender GmbH & Co. KG, Germany The catalogue and the articles and illustrations which it contains are protected by copyright. Reproduction, translation, microfilming and storage in electronic systems, in particular for commercial purpose
Categories
Published
of 196
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  Main catalogue part 2 Hospital engineering BENDER Group 2  2 Main catalogue part 2 – 07.2009/Hospital engineering       2  .      0 Subject to change! – © Dipl.-Ing. W. Bender GmbH & Co. KG, GermanyThe catalogue and the articles and illustrations which it contains are protected by copyright. Reproduction, translation, microfilming and storage in electronic systems, in particular for commercial purposes, are prohibited without the publisher's consent. We provide no warranty or guarantee for erroneous or omitted entries. All data is based on manufacturer's information. All logos and product designations are registered trademarks of the respective manufacturer. Main catalogue part 2Hospital engineering Edition 07.2009Further information on other product ranges : Dipl.-Ing. W. Bender GmbH & Co. KGLondorfer Str. 65 D - 35305 Grünberg · GermanyP.O.B. 1161D - 35301 Grünberg · GermanyTel. +49 6401 807-0Fax +49 6401 807-259E-Mail: info@bender-de.comInternet: www.bender-de.com   Main catalogue part 2 – 07.2009/Hospital engineering 3       2  .      0 Table of contents Chapter 2.0 Introduction  4 – 7 Device overview – Changeover and control modules for main distribution boards  8 – 9 Device overview – Changeover and monitoring modules for group 2 medical locations  10 – 11 Device overview – Isolating transformers, transformers for operating theatre luminaires  12  Device overview – Alarm indicator and operator modules  13 Device overview – Signal converters  14 Device overview – Protocol converters for BMS, standard fieldbus systems and Ethernet networks  15 Device overview – Interface converters and repeaters  16 Device overview – Software  17 Device overview – Power supply units, mounting kits  18 Device overview – Insulation monitoring devices  19 Device overview – Floor-standing distribution cabinets and wall mounted distribution boards for IT systems  20 – 23Chapter 2.1 – Control modules for supply transfer systems with load switches / circuit breakers in main distribution boards Control module USC710D4-…-HA  26 – 29 Changeover and monitoring moduleUMC710D4 – UMC710D4-HA – UMC710D4-E1  30 – 33 Changeover module UMC108E  34 – 35 TMX-HA operator panel  36 – 37Chapter 2.2 – Changeover and monitoring modules for group 2 medical locations Changeover and monitoring module UFC107E  40 – 45 Changeover and monitoring module UMC107E  46 – 49 Monitoring module LFC107E  50 – 53 Monitoring module LTIC107E/D  54 – 56 Article numbers for Striebel und John distribution board panels 57Chapter 2.3 – Isolating transformers, accessories Isolating transformer ES710  60 – 63 Isolating transformer DS0107  64 – 67 Operating theatre luminaires transformers ESL0107  68 – 69Chapter 2.4.1 – Indication and operation Remote alarm indicator and test combination MK2430  72 – 77 Remote alarm indicator and test combination MK800  78 – 84Chapter 2.4.2 – Indication and operation Remote alarm indicator and operator panels TM800  86 – 97 TM800 antibacterial  98 – 99Chapter 2.5.1 – Accessories: I/O modules, communication solutions Signal converters for MEDICS® systems Signal converter SMI472-12  102 – 103 Signal converter SMO480(E)-12  104 – 105 Signal converter SMO481-12  106 – 107 Signal converter SMO482P-12  108 – 109Chapter 2.5.2 – Accessories: Protocol converter for BMS, standard field bus systems and Ethernet networks Protocol converter FTC470XET  112 – 113 Protocol converter FTC470XMB  114 – 115 Protocol converter FTC470XDP  116 – 117 Protocol converter DI400  118 – 119Chapter 2.5.3 – Accessories: Protocol converter und repeaters RS-485 interface repeater DI-1PSM  122 – 123 Interface converter DI-2  124 Interface converter DI-2USB  125Chapter 2.5.4 – Accessories: Visualization Axeda Supervisor  128 – 129 BMS OPC server  130 – 131Chapter 2.5.5 – Accessories: Power supply units – Assembly kits Power supply unit AN450  134 – 135 Enclosure mounting  136Chapter 2.6 – Single components A-ISOMETER® IR420-D6  138 – 141 A-ISOMETER® IR426-D47  142 – 146Chapter 2.7 – Floor-mounted and wall-mounted distribution cabinets for IT systems IT system distribution cabinet TR-VITCF  148 – 151 IT system distribution cabinet TR-VITC  152 – 155 IT system floor-standing distribution cabinet Series …-IPS-F  156 – 163 IT system floor-standing distribution cabinet Series …-IPS-F/EDS  164 – 171 IT system wall-mounted distribution boards Series…-IPS-W and -IPS-RW  172 – 179 IT system wall-mounted distribution boards Series…-IPS-W/EDS, -IPS-RW/EDS  180 – 185Annex – Applied standardsService and project planning Applied standards and regulations  188 Applied standards  189 Standards and devices – Table of assignments  190 Service and project planning  191 Page Page  4 Main catalogue part 2 – 07.2009/Hospital engineering       2  .      0 Bender – The company Bender is an innovative, medium-sized company specialising in electrical safety and based in Grünberg in the German state of Hesse. Thanks to its entrepreneurial spirit, “can-do” attitude and collaborative management style, the company, which was founded in 1939 by Dipl.-Ing. Walther Bender, is now an international group with more than 400 employees. Having constantly expanded its range of products in consultation with customers, Bender is now in a position to offer practical solutions for all areas of electrical safety.Key focus areas include the development, pro-duction, distribution and servicing of insulation monitoring devices (A-ISOMETER®), residual current monitors, supply monitoring systems, test engi-neering equipment, alarm indicator and operator panels, as well as complete power supplies. These systems serve as an early warning system for detecting faults in electrical and electronic in-stallations and are primarily used in applications where high levels of operational reliability and protection against fire and explosion are required. In this context, our internationally recognised quality management system and flexible corporate culture, which is based on the principle of coope-ration, provide the basis for our high-quality pro-ducts and services. Bender – A worldwide presence Bender has subsidiaries and representatives worldwide, who provide users on all continents with the support they need. Our experienced application engineers are there to offer you expert advice when it comes to selecting, configuring and using your systems. Th Power in
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks