Documents

DFM

Description
u
Categories
Published
of 16
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  LVIM   Design   For   Manufacturing   Analysis 3D   Systems   Quickparts   Solutions PART   NAME:   Q  ‐ Sample DATE:   Disclaimer: Design changes made as a result of this report are done so at your own risk. In no event shall Quickparts or its subsidiaries or affiliates be liable to any user or any third party for any damages whatsoever (including, without limitation, direct, indirect, incidental, consequential, special, exemplary, or lost profits) resulting from the use of this information. While all attempts have been made to illustrate potential design and manufacturability issues, there may be design/tooling changes required after production to produce parts that meet design and functionality intent.  ã  Part   Orientation   and   Parting   Line ã  Draft   Analysis ã  Features   Requiring   Side   Actions ã  Rib/Bosses   &   Wall   Thickness   Ratio ã  Thickness   Analysis ã  Warp   Analysis ã  Shut ‐ off    Conditions ã  Thin   Tool   Conditions ã  Features   Requiring   EDM ã  Weld   line DFM   SUMMARYCRITERIA: Requires ModificationMinor or Cosmetic Issue – Requires Customer ApprovalNo issues –For Your Information KEY:  PARTING   LINE   and   ORIENTATION ãParting lines may flash as a result of, but not limited to, part material, draft, wall thickness and mold usage. Part strength and surface appearance may not be as expected as a result of manufacturing orientation  ãParts should have at minimum 1 deg. draft added to all surfaces with textured surface requiring more draft ãOur analysis shows the part should not require any draft adjustments DRAFT   ANALYSIS

test1

Jul 23, 2017
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks