Documents

INSULATING OIL.pdf

Description
‫اﻟﺸﺮآﺔ اﻟﺴﻌﻮدﻳﺔ ﻟﻠﻜﻬﺮﺑﺎء‬ Saudi Electricity Company SEC DISTRIBUTION MATERIALS SPECIFICATION SEC- 02- 01 DATE: 6-4-2004G SEC-02-01 SPECIFICATIONS FOR INSULATING OIL FOR TRANSFORMERS AND SWITCHGEAR This specification is property of SEC and subject to change or modification without any notice Saudi Electricity Company ‫اﻟﺸﺮآﺔ اﻟﺴﻌﻮدﻳﺔ ﻟﻠﻜﻬﺮﺑﺎء‬ SEC DISTRIBUTION MATERIALS SPECIFICATION SEC-02-01 DATE: 6-4-2004G CONTENTS S. NO. DESCRIPTION PAGE NUMBER 1. SCOPE 3 2. CROSS REFERENCE
Categories
Published
of 3
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
    Saudi Electricity Company ﺎﺑﺮﻬﻜﻠﻟ   ﺔﻳدﻮﻌﺴﻟ ﺔآﺮﺸﻟ SEC- 02- 01 SEC DISTRIBUTION MATERIALS SPECIFICATIONDATE: 6-4-2004G SEC-02-01 SPECIFICATIONS FOR INSULATING OIL FOR TRANSFORMERS AND SWITCHGEAR    This specification is property of SEC and subject to change or modification without any notice    Saudi Electricity Company ﺎﺑﺮﻬﻜﻠﻟ   ﺔﻳدﻮﻌﺴﻟ ﺔآﺮﺸﻟ SEC-02-01 SEC DISTRIBUTION MATERIALS SPECIFICATIONDATE: 6-4-2004G Page 2 of 3   C O N T E N T S S. NO. D E S C R I P T I O N PAGE NUMBER 1. SCOPE 3 2. CROSS REFERENCE 3 3.   APPLICABLE CODES AND STANDARDS 3 4.   REQUIREMENTS 3    Saudi Electricity Company ﺎﺑﺮﻬﻜﻠﻟ   ﺔﻳدﻮﻌﺴﻟ ﺔآﺮﺸﻟ SEC-02-01 SEC DISTRIBUTION MATERIALS SPECIFICATIONDATE: 6-4-2004G Page 3 of 3   1. SCOPE: This SEC  Distribution Material Specification ( SDMS ) specifies the minimum technical requirements for materials, testing and inspection for insulated Oil to be used in the Distribution Network of Saudi Electricity Company ( SEC ) in Saudi Arabia. 2. CROSS REFERENCES: This Material Standard Specification shall be read in conjunction with the SEC Specification No: 01-SDMS-01 (latest revision), titled “General Requirements for All Equipment/Materials”, which shall be considered as an integral part of this SDMS, also  be read in conjunction with SEC Purchase Order requirements or Contract Schedul es. 3. APPLICABLE CODES & STANDARDS: Material or equipment supplied to this specification shall comply with the latest edition of the industry codes and standards listed below, unless otherwise noted. In case of any deviation, the Vendor/Manufacturer may propose Material conforming to an alternate Code or Standard without jeopardizing the requirements of this SDMS. However, the  provision of SEC Standard shall supersede the provision of these Standards in case of any differences.    IEC 296 Specification for New Insulating Oils for Transformers and Switchgear       ASTM D3487 Standard Specification for Mineral Insulating Oil Used in Electrical  Apparatus.   4.   REQUIREMENTS:   The oil shall be virgin hydrocarbon mineral oil specifically manufactured for use as electrical insulating oil. The oil shall contain no additives, shall be certified to be PCB (polychlorinated biphenyls) free and shall meet the following requirements:    IEC 296 Class 1 or ASTM D3487 Type 1.    The oil shall be delivered in clean oil drums of approximately 200 litres capacity.    Each oil drum to seal as tight as possible, so that the drum is fully waterproof.    Each oil drum to be indelibly marked with the following information: Supplier’s name Date of drumming Class of Oil Drum Capacity (litres) Filled drum weight Kg. Purchase Order No.
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks