Documents

mETA_v17.0.0_Release_Notes.pdf

Description
Release Notes β BETA Kato Scholari, Thessaloniki GR-575 00 Epanomi Greece Tel. +30 23920 21420 Fax. +30 23920 21417 URL: http://www.beta-cae.com Customer Services email: ansa@beta-cae.gr μETA v17.0.0 Release Notes Introduction 1. Introduction This document contains all the information that a µETA user should know about new features that have been added, improvements on existing features and various problems that were
Categories
Published
of 21
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
    Release Notes    Kato Scholari, Thessaloniki GR-575 00 Epanomi Greece Tel. +30 23920 21420 Fax. +30 23920 21417 URL: http://www.beta-cae.com Customer Services email: ansa@beta-cae.gr    BE T  A  β      μE  T  A v17.0.0 Release Notes Introduction 3 1. Introduction This document contains all the information that a µETA user should know about new features that have been added, improvements on existing features and various problems that were fixed during the development of µETA version 17.0.0 . Notes to specific versions: Sessions created prior to v16.0.2  Anny sessions created prior to v16.0.2, that contained Strain Gauges  handling will not work correctly due to changes in the command variables used e.g. EX    E1, EY    E2, EXY    E12. Sessions created up to v15.3.x In sessions that read curves from f  iles, if a part of the entity‟s name was used in the “read command” then curves for all the entities that had this part in their name were created in versions up to 15.3.x. From v16.0.0 these sessions will create curves only if the name that was used matches the name of the entity. If a part of the entities‟ name was used in the session to produce curves for all the entities then in order to get the same results in v16.0.0 and on, the session must be edited. The wild character * must be added next to the en tity‟s name.  Sessions that read airbag curves from abstat_cpm  type of LS-Dyna binout   files must change in v16.x. From: xyplot read lsdyna window_name binout abstat-Airbag ...  To: xyplot read lsdyna window_name binout abstat_cpm-CpmAirbag ...  Sessions that read ANSYS Composite Stresses for outer / inner Global Layers must change in v16.x to read top / bottom results. For example the command: read onlyfun Ansys <filename> all CompositeStresses,Normal-1,GlobalLayer:3. outer ,Centroid  must change to: read onlyfun Ansys <filename> all CompositeStresses,Normal-1,GlobalLayer:3. top ,Centroid   Sessions created from v15.2.0 up to v15.2.1  Any sessions created from v 15.2.0 up to v15.2.1, that contained axisymmetric elements stress linearization commands will not work in the newer versions due to radical changes in the respective commands. Sessions created up to v15.1.3  Any sessions created up to v15.1.3, where transparency on some elements was applied, through command: color element transparency <Range> <act/all/pick/...> , will now behave in a different manner, given that from now on, the elements with transparency will be drawn with their srcinal color (PID color or color given by color element  command) and transparency when the Fringebar is activated. Sessions created up to v15.1.2 For ANSYS, any sessions created up to v15.1.2, which read Spc Forces results will be incompatible with the new versions, where SPC Forces are renamed to Reaction Forces. In the following example the command: read onlyfun Ansys ./example.rst all SpcForces,Translational,Magnitude  must be translated to: read onlyfun Ansys ./example.rst all ReactionForces,Translational,Magnitude   μE  T  A v17.0.0 Release Notes Introduction 4 Sessions created from v14.0.0 up to v15.1.1  Any sessions created in- between versions 14.0.0 and 15.1.1, that lock a 2D plot‟s axis range did also lock the axis‟ step. This behavior has changed in v15.1.2, so in order for the older sessions to work the same, in case of commands such as: xyplot plotoptions yauto on <WINDOW NAME> <PLOT ID>  the user should add below the command: xyplot gridoptions ystep <WINDOW NAME> <PLOT ID> <STEP>  to define the step precisely. Sessions created up to v6.8.3  Any sessions created in a version up to v6.8.3 which enable the fringebar with the command grstyle fringe enable  will invoke both scalar and vector fringebars if they run after applying any of the new fringe related commands introduced in v14.0.0 (e.g. grstyle vectorfringe enable/disable ). Versions prior to 6.7.0 The Major Principal / Von Mises option up to version 6.6.4 was in fact calculating the Absolute Max Principal / Von Mises result. For version 6.7.0 this option has been renamed to Absolute Max Principal / Von Mises. Sessions that included commands for loading Major Principal / Von Mises results will, when run with versions 6.7.0 or later, only load Von Mises results and need to be corrected accordingly. Notations: Throughout this document, the following text presentation conventions are followed to distinguish the various text interpretations. Object  –  Action Presentation Example Keyboard keys  All capital and Italic ENTER  ETA terms, functions & buttons First Letter Capital & Italic Curve Options  card    ETA commands Courier color background black User input in commands or elsewhere Courier, Italic and Underlined read session test.op2   Referenced field for user input <Quoted> read session <File name>  Available options within the same step of a command application In brackets and separated by slashes { / / / } explode model interactive  {<Enter Model id> / act / all } Copyright note:  All other company and product names mentioned in the software and its documentation are property, trademarks or registered trademarks of their respective owners.
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks