Instruction manuals

n7k Installing Hig

Description
Nexus 7000 instalacion
Published
of 508
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  Americas Headquarters Cisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883 Cisco Nexus 7000 Series Hardware Installation and Reference Guide October 10, 2013 Text Part Number: OL-23069-07  THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense. The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures:ã Turn the television or radio antenna until the interference stops.ã Move the equipment to one side or the other of the television or radio.ã Move the equipment farther away from the television or radio.ã Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the television or radio are on circuits controlled by different circuit breakers or fuses.) Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. Cisco Nexus 7000 Series Hardware Installation and Reference Guide   © 2008-2013 Cisco Systems, Inc. All rights reserved..  iii Cisco Nexus 7000 Series Hardware Installation and Reference GuideOL-23069-07 CONTENTS Preface  xiii New and Changed Information  xxiii CHAPTER   1 Overview  1-1 Cisco Nexus 7000 Series  1-1 Cisco Nexus 7004 Switch  1-1 Cisco Nexus 7009 Switch  1-4 Cisco Nexus 7010 System  1-9 Cisco Nexus 7018 System  1-15 Preparing the Site  1-22 Safety Guidelines  1-23 Installation and Connection Guidelines  1-23 Managing the System Hardware  1-24 Replacing Components  1-24 CHAPTER   2 Installing a Cisco Nexus 7004 Chassis  2-1 Preparing to Install the Switch  2-1 Required Tools  2-2 Installing a Rack or Cabinet  2-2 Unpacking and Inspecting a New Switch  2-3 Installing the Chassis  2-4 Prerequisites for Installing the Chassis  2-4 Installing the Center-Mount Brackets  2-5 Installing the Chassis in a Rack  2-6 Grounding the Cisco Nexus 7004 Chassis  2-9 Prerequisites for Grounding the Chassis  2-9 Connecting the System Ground  2-9 Connecting Your ESD Wrist Strap to the Chassis  2-11 Installing the Cable Management Frames  2-11 Installing USB Storage Media in a Supervisor 2 or 2E Module  2-12 Installing the Air Filter  2-13  Contents iv Cisco Nexus 7000 Series Hardware Installation and Reference GuideOL-23069-07 CHAPTER   3 Installing a Cisco Nexus 7009 Chassis  3-1 Preparing to Install the Switch  3-1 Required Tools  3-2 Installing a Rack or Cabinet  3-2 Unpacking and Inspecting a New Switch  3-3 Installing the Bottom-Support Rails on the Rack  3-4 Prerequisites for Attaching the Bottom-Support Rails  3-5 Required Tools and Equipment  3-5 Attaching the Front-Mount Bottom-Support Rails  3-6 Attaching the Center-Mount Bottom-Support Rails  3-8 Installing the Chassis  3-11 Prerequisites for Installing the Chassis  3-11 Required Tools and Equipment  3-12 Mounting the Chassis by its Front Brackets  3-13 Mounting the Chassis by its Center Brackets  3-15 Grounding the Cisco Nexus 7009 Chassis  3-19 Prerequisites for Grounding the Chassis  3-20 Required Tools and Equipment  3-20 Connecting the System Ground  3-20 Connecting Your ESD Wrist Strap to the Chassis  3-23 Installing the Cable Management Frames  3-24 Installing the Front Door and Air Intake Frame  3-27 Installing Storage Media in a Supervisor Module  3-35 CHAPTER   4 Installing a Cisco Nexus 7010 Chassis  4-1 Preparing to Install the Switch  4-1 Required Tools  4-2 Installing a Four-Post Rack or Cabinet  4-2 Unpacking and Inspecting a New Switch  4-3 Installing the Bottom-Support Rails on the Rack  4-4 Prerequisites for Attaching the Bottom-Support Rails  4-4 Required Tools and Equipment  4-4 Attaching the Bottom-Support Rails  4-4 Installing the Chassis  4-7 Prerequisites for Installing the Chassis  4-7 Required Tools and Equipment  4-8 Installing the Chassis  4-9 Grounding the Cisco Nexus 7010 Chassis  4-11
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks