Documents

Pipe and Fitting Chart

Description
Pipe and Fitting
Categories
Published
of 12
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  Atlas Technical Services ã assist with grade selection and metallurgical properties of steel;ã assist with product selection to meet specific needs;ã assist with the nomination and interpretation of specifications;ã recommend fabrication procedures;ã investigate metallurgical problems when they occur;ã train staff and those of our customers in the application with use of stainless and special steels.The Technical Department has a fully equipped metallurgical laboratory, which is accredited by NATA fortensile testing and hardness testing. It also has facilities for conducting metallographic examinations.The Department establishes and maintains the quality standards for product supply from mills and conductsa testing program to ensure that product sold by Atlas Steels meets those standards. Atlas Project Specialists Atlas has specialist project teams in Australia and New Zealand who areoriented to provide major infrastructure developments, upgrades and on-goingmaintenance with Atlas products and services.They work with project engineers, principals and contractors to make it happenwhen it should. Atlas Expertise has been built up to service the key industrialand resources markets of: ã Oil & Gas (on and off shore) ã Food & Beverage Productionã Pulp & Paper Manufacturing ã Petrochemical Processingã Energy Generation ã Miningã Water Treatment & Waste Control ã Minerals Processingã Pharmaceutical Processing ã Transportationã Major Construction ã Defence Atlas Product Services ã Cut to length, Blanking ã Polishing (Sheet, Coil, Tube, Pipe, Bar)ã Recoiling ã Plasma and Oxy profiling of Plateã Slitting ã Bandsaw cutting of Bar Atlas Warehouse Locations ã Adelaide ã Darwin ã Sydney ã Mackayã Auckland ã Dunedin ã Townsville ã Melbourne ã Brisbane ã Gladstone ã Wellington ã Newcastleã Christchurch ã Launceston ã Wodonga ã Perth Product, Processing and Technical information is available by download directly from our web site Atlas Stainless and Specialty Metals Product Carbon steelLow alloy steelQ & T steels ✓ ✓ ✓✓ ✓✓ ✓ ✓✓ ✓✓✓✓ ✓✓ ✓✓ ✓✓ ✓✓ ✓✓ ✓✓ ✓✓✓ ✓ ✓✓ ✓✓ ✓✓✓ ✓ ✓✓ ✓✓ ✓✓ ✓✓ ✓✓ ✓✓ ✓ ã Ferriticã Austenitic ã 3CR12ã Duplexã Super austeniticã Super duplexã Martensitic PlateSheetcoil stripTube andfittings Aluminium Titanium alloysCopper-nickel alloysNickel alloys BarPipe andfittings Stainless steel Customers are invited to take advantage of the technical service provided by Atlas Steels; all enquiries canbe directed to: Freecall 1800 818 599Email: tech@atlas-steels.com.au www.atlas-steels.com.au ATLASSTEELS METALSDISTRIBUTION Limitation of liability  The information contained in this handbook is not intended to be an exhaustive statement of all relevant data applicable to special and general steel products. It has been designed as a guide for customers to the products and services Atlas Steels can offer. No responsibility is implied or accepted for or in conjunction with quality or standard of any product or its suitability for any purpose or use.It is the responsibility of the user to ensure product specified is fit for the purpose intended. All conditions, warranties, obligations and liabilities of any kind which are or may be implied or imposed to the contrary by any statute, rule or regulation or under the general law and whether arising from the negligence of the company, its servants or otherwise are hereby excluded except tothe extent that the company may be prevented by any statute, rule or regulation from doing so. 1     S  1   0   P r i  n t  e d  O c  t  o b  er 2  0  0 2   www.atlas-steels.com.au ATLASSTEELS METALSDISTRIBUTION 2     S  1   0   P r i  n t  e d  O c  t  o b  er 2  0  0 2  GradeUNS No.CMnPSSiCrNiMoOther Austenitic Stainless Steels 304 S30400 0.08 2.0 0.045 0.03 0.75 18.0 - 20.0 8.0 - 10.5 N 0.10304L S30403 0.03 2.0 0.045 0.03 1.00 18.0 - 20.0 8.0 - 12.0 N 0.10304H S30409 0.04 - 0.10 2.0 0.045 0.03 0.75 18.0 - 0.20 8.0 - 10.5 N 0.10309S S30908 0.08 2.0 0.045 0.03 1.00 22.0 - 24.0 12.0 - 15.0310 S31000 0.25 2.0 0.045 0.03 1.50 24.0 - 26.0 19.0 - 22.0316 S31600 0.08 2.0 0.045 0.03 0.75 16.0 - 18.0 10.0 - 14.0 2.0 - 3.0 N 0.10316L S31603 0.03 2.0 0.045 0.03 0.75 16.0 - 18.0 10.0 - 14.0 2.0 - 3.0 N 0.10317L S31703 0.03 2.0 0.045 0.03 0.75 18.0 - 20.0 11.0 - 15.0 3.0 - 4.0 N 0.10321 S32100 0.08 2.0 0.045 0.03 0.75 17.0 - 19.0 9.0 - 12.0 N 0.10, Ti = 5x(C+N)min. 0.70max347 S34700 0.08 2.0 0.045 0.03 0.75 17.0 - 19.0 9.0 - 13.0 Nb 10XC min. 1.0 max253MA S30815 0.05 - 0.10 0.8 0.04 0.03 1.1 - 2.0 20.0 - 22.0 10.0 - 12.0 N 0.14 - 0.20, Ce 0.03 - 0.08904L N08904 0.02 2.0 0.045 0.035 1.00 19.0 - 23.0 23.0 - 28.0 4.0 - 5.0 Cu 1.0 - 2.0254 SMO S31254 0.02 1.0 0.03 0.01 0.80 19.5 - 20.5 17.5 - 18.5 6.0 - 6.5 N 0.18 - 0.22, Cu 0.5 - 1.0 Duplex Stainless Steels Duplex 2205 S31803 0.03 2.0 0.03 0.02 1.00 21.0 - 23.0 4.5 - 6.5 2.5 - 3.5 N 0.08 - 0.20Duplex 2304 S32304 0.03 2.5 0.04 0.03 1.00 21.5 - 24.5 3.0 - .6 3.0 - 5.5Super Duplex 32750 S32750 0.03 1.2 0.035 0.02 0.80 24.0 - 26.0 6.0 - 8.0 3.0 - 5.0 N 0.24 - 0.32, Cu 0.5Super Duplex 32760 S32760 0.03 2.0 0.03 0.01 1.00 24.0 - 26.0 6.0 - 8.0 3.0 - 4.0 N 0.20 - 0.30, W 0.5 - 1.0UR52N+S32520 0.03 1.5 0.035 0.02 0.80 24.0 - 26.0 5.5 - 8.0 3.0 - 4.0 N 0.20 - 0.35, Cu 0.5 - 2.0 Nickel Alloys Alloy 400 N04400 0.30 2.0 0.024 0.50 63.0 Cu 28.0 - 34.0, Fe 2.5Alloy 600 N06600 0.15 1.0 0.015 0.50 14.0 - 17.0 72.0 Cu 0.5, Fe 6.0 - 10.0Alloy 601 N06601 0.10 1.0 0.015 0.50 21.0 - 25.0 58.0 - 63.0 Cu 1.0, Al 1.0 - 1.7, Fe BalanceAlloy 800 N08800 0.10 1.5 0.015 1.00 19.0 - 23.0 30.0 - 35.0 Fe 39.5, Cu 0.75, Al 0.15 - 0.60Ti 0.15 - 0.60Alloy 825 N08825 0.05 1.0 0.03 0.50 19.5 - 23.5 38.0 - 46.0 2.5 - 3.5 Fe 22.0, Cu 1.5 - 3.0, Ti 0.6 - 1.2Al 0.2 Titanium Grade 2 R50400 0.08 Ti 98.8, N 0.03, H 0.015, Fe 0.30, O 0.25Grade 12 R53400 0.08 0.6 - 0.9 0.2 - 0.4 Ti 98.9, N 0.03, H 0.015, Fe 0.30, O 0.25 Note: Single values shown are maxima Chart of Common Stainless Steel Pipe & Fittings GradesChemical Analysis (%) Specified  Welded & Seamless Stainless Steel Steel PipeASME B36.19M Note 1:  For dimensional tolerances refer to ASME B36.19M Note 2:  Formula for circular steel pipe kilograms/metre M = (D-t) t x 0.02466 Nominal SizeOD Schedule 40S Wgt (kg/m) WT (mm) mmNPSDN WT (mm)  Wgt (kg/m)  WT (mm)  Wgt (kg/m) Pressure Pipe  Specification ASTM A312/A 312M Dimensions ASME B36.19M Product  Seamless & Welded austenitic stainless steel forhigh temperature and general corrosive environments Grades  Refer Standard – all common austenitic grades Specification ASTM A790/A 790M Dimensions ASME B36.19M Product  Seamless & Welded duplex stainless steel for highly corrosive environments Grades  Refer Standard – all duplex and super duplex grades Buttwelding Specification ASTM A403/A 403MFittings  Dimensions ASME B16.9 Product  Stainless Steel Pipe Fittings Grades  Refer Standard – ferritic, duplex, super duplex and martensitic grades Specification ASTM A815/A 815M Dimensions ASME B16.9 Product  Stainless Steel Pipe Fittings Grades  Refer Standard – all common austenitic grades Flanges  Specification ASTM A182/A 182M Dimensions ASME B16.5 Product  Weld Neck, Slip-on, Blind flangesFace Plain, Raised FaceBore Pipe scheduleClass 150, 300, 400, 600, 900, 1500, 2500 (to 600mm only) Grades  Stainless and Low Alloy Steel Specification AS2129 Dimensions AS2129 Product  Slip-on, Blind “Table” flangesFace PlainBore To suit Pipe & Tube ODTable D, E, F, and H SPECIFICATIONS ã Stainless Steel Pipe, Buttwelding Fittings, FlangesSTAINLESS STEEL PIPEã Dimensions & Weights Schedule 10SSchedule 80S www.atlas-steels.com.au ATLASSTEELS METALSDISTRIBUTION 6  1  /  8  10.3 1.24 0.28 1.73 0.37 2.41 0.478  1  /  4  13.7 1.65 0.49 2.24 0.63 3.02 0.8010  3  /  8  17.1 1.65 0.63 2.31 0.84 3.20 1.1015  1  /  2  21.3 2.11 1.00 2.77 1.27 3.73 1.6220  3  /  4  26.7 2.11 1.28 2.87 1.69 3.91 2.2025 1 33.4 2.77 2.09 3.38 2.50 4.55 3.2432 1 1  /  4  42.2 2.77 2.70 3.56 3.39 4.85 4.4740 1 1  /  2  48.3 2.77 3.11 3.68 4.05 5.08 5.4150 2 60.3 2.77 3.93 3.91 5.44 5.54 7.4865 2 1  /  2  73.0 3.05 5.26 5.16 8.63 7.01 11.4180 3 88.9 3.05 6.45 5.49 11.29 7.62 15.2790 3 1  /  2  101.6 3.05 7.40 5.74 13.57 8.08 18.63100 4 114.3 3.05 8.36 6.02 16.07 8.56 22.32125 5 141.3 3.40 11.57 6.55 21.77 9.53 30.97150 6 168.3 3.40 13.84 7.11 28.26 10.97 42.56200 8 219.1 3.76 19.96 8.18 42.55 12.70 64.64250 10 273.0 4.19 27.78 9.27 60.31 12.70 81.54300 12 323.9 4.57 36.00 9.53 73.88 12.70 97.45350 14 355.6 4.78 41.30 9.53 81.33 12.70 107.39400 16 406.4 4.78 47.29 9.53 93.27 12.70 123.30 450 18 457 4.78 53.26 9.53 105.16 12.70 139.21500 20 508 5.54 68.61 9.53 117.15 12.70 155.12550 22 559 5.54 75.53 9.53 129.13 12.70 171.03600 24 610 6.35 94.45 9.53 141.12 12.70 186.94750 30 762 7.92 147.36 9.53 176.84 12.70 234.67  3     S  1   0   P r i  n t  e d  O c  t  o b  er 2  0  0 2   Linepipe  Specification ASTM A53/A53M Dimensions ASME B36.10 Product  Welded and Seamless Steel Pipe for High and Low Temperature and Pressure Grades  A, B Specification ASTM A106 Dimensions ASME B36.10 Product  Seamless Carbon Steel Pipe for High Temperature Service Grades A,B,C (Indicates tensile strength and yield point design) Specification ASTM A335/A335M Dimensions ASME B36.10 Product  Seamless Ferritic Alloy-Steel Pipe for High Temperature Service Grades  Refer Standard for grades Specification ASTM A333/A333M Dimensions ASME B36.10 Product  Seamless & ERW Carbon and Alloy Steel Pipe for Low Temperature Service Grade  Refer Standard for grades Specification API 5L Dimensions ASME API 5L, B36.10 Product  Seamless & ERW for conveying Water, Oil, Gas Grades  B, X42, X52, X60, Refer API 5L specification for others Structural Steel  Specification AS1163 Dimensions AS1163 Product  Structural Steel Hollow Sections Grade  C350 Buttwelding  Specification ASTM A234/A234MFittings( Moderate and High Temperature Service) ASTM A420/A420M (Low Temperature Service) Dimensions ASME B16.9 Product  Elbows, Reducing Elbows, Returns, Tees, Crosses, Reducers, Stub Ends, Caps Grade  WPB, WPL Flanges  Specification ASTM A105/A105M Dimensions ASME B16.5 Product  Weld Neck, Slip-on, Blind FlangesFace Plain, Raised FaceBore Pipe ScheduleClass 150, 300,400, 600, 900, 1500, 2500 (to600mm only) Grade  Carbon Steel Specification AS2129 Dimensions AS2129 “Table” flanges pressure – temperature ratings, materials and dimensions Application  Slip-on, Blind “Table” FlangesFace PlainBore To suit Pipe & Tube ODTable D, E, F, and H SPECIFICATIONS ã Carbon Steel Pipe, Buttwelding Fittings, Flanges www.atlas-steels.com.au ATLASSTEELS METALSDISTRIBUTION 4     S  1   0   P r i  n t  e d  O c  t  o b  er 2  0  0 2 
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks