Documents

Scan Direct Manual

Description
Por475 manual
Categories
Published
of 8
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  Updated: 2013.05.15 SCAN Direct Software Manual 1 Install the software 1. Insert the Software Installation CD into your computer, launch the setup through Auto Run. 2. If the Auto Run window does not open on your computer automatically, go to your My Computer (PC) and find the driver under CD, double click the AutoRun.exe file to launch the set up accordingly. 3. Click the [SCAN Direct] button to install the SCAN Direct software. 4. Follow the instructions on the Setup Wizard , read the explanation, click the [Next] button to complete the software installation process. 5. When the installation is completed, click the [Close] button to exit the installer.  Updated: 2013.05.15 2 Startup 1. Turn off the scanner. If your scanner has the Wi-Fi function, make sure the Wi-Fi feature is turned off. 2. Connect your scanner to the computer with the USB cable included. 3. Turn on your scanner. 4. Open the SCAN Direct software on your computer. Note: If it is a handheld scanner without docking station or a single auto-feed scanner, you are now ready to directly scan your document to the computer; If it is a 2-in-1 combo of handheld scanner with docking station, you need to press the Scan button once before getting ready to directly scan your document to the computer. (The diagram below is for illustration purposes only, outer appearance of the scanner is subjected to the model being connected) 3 Scan 1. When using a handheld scanner without docking station, press the Scan button once to start the scanning process. When using an auto-feed scanner or a handheld scanner with docking station, softly insert the paper into the slot, scanning will start automatically once it detects the document. 2. Contents of the scanned document will be shown on the SCAN Direct preview area during scanning process. Note: For a handheld type scanner without a docking station, press the Scan button again to stop scanning when the scanner has reached the end of the document. For a single auto-feed scanner or a 2-in-1 combo of handheld scanner with docking station, it will stop scanning once it finishes scanning the whole page. 3. Once scanning is completed, a thumbnail image of the scanned document will be created on the right side. (The diagram below is for illustration purposes only, outer appearance of the scanner is subjected to the model being connected)  Updated: 2013.05.15 4. Continue to scan the other pages of your document. (The diagram below is for illustration purposes only, outer appearance of the scanner is subjected to the model being connected) 4 Preview & Edit The SCAN Direct software provides you various tools  –  Zoom, Undo to srcinal, Undo, Redo, Crop, Rotate (left/right), Flip, Save to clipboard and Resize for you to edit any scanned image in the thumbnail list. Tools: 1. Zoom Zoom in or zoom out the image by selecting the zoom ratio from 25%, 50%, 75%, 100%, 150%, 200%, 300%, Fit Width, Fit Height, Fit Box 2. Undo to srcinal Undo all edits already taken and restore the image to the srcinal condition. 3. Undo Undo the most recent edit and restore the image to the previous condition. 4. Redo Re-apply the action you have just undone. 5. Crop Scan finished  Updated: 2013.05.15 To create a new image by cutting out a desired rectangular portion from it. 6. Rotate 90  to left Rotate the image counterclockwise by 90    7. Rotate 90  to right Rotate the image clockwise by 90    8. Flip Create a mirrored image of the image 9. Save to clipboard The image will be saved for you to paste it to your designated document. (Ex. Copy and Paste) 10. Resize  Adjust the size of the image 1. Select the image you wish to edit from the thumbnail list, double click the image to preview. Proceed to edit your image on the SCAN Direct preview area. Note: When editing, click the button to cancel the edit action or click the button to confirm the edit action. (The diagram below is for illustration purposes only, outer appearance of the scanner is subjected to the model being connected) 2. When cropping the image, click the button and select the target area you wish to crop. 3. When resizing the image, click the button to set the target Height and Width values in pixels for your images. Click Crop Double Click
Search
Tags
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks