Sales

Design of Structural Elements

Description
Design of Structural Elements
Categories
Published
of 655
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  W.M.C. M c Kenzie Design of Structural Elements    Design of Structural Elements W.M.C. M c Kenzie BSc, PhD, CPhys, MInstP, CEng. Teaching Fellow, Napier University, Edinburgh    © W. M. C. McKenzie 2004 All rights reserved. No reproduction, copy or transmission of this publication may be made without written permission. No paragraph of this publication may be reproduced, copied or transmitted save with written permission or in accordance with the provisions of the Copyright, Designs and Patents Act 1988, or under the terms of any licence permitting limited copying issued by the Copyright Licensing Agency, 90 Tottenham Court Road, London W1T 4LP. Any person who does any unauthorised act in relations to this publication may be liable to criminal prosecution and civil claims for damages. The author(s) has/have asserted his/her/their right(s) to be identified as the author(s) of this work in accordance with the Copyright, Designs and Patents Act 1988. First published 2004 by PALGRAVE MACMILLAN Houndmills, Basingstoke, Hampshire RG21 6XS and 175 Fifth Avenue, New York, N.Y. 10010 Companies and representatives throughout the world PALGRAVE MACMILLAN is the global academic imprint of the Palgrave Macmillan division of St. Martin’s Press LLC and of Palgrave Macmillan Ltd. Macmillan © is a registered trademark in the United States, United Kingdom and other countries. Palgrave is a registered trademark in the European Union and other countries. ISBN 1–4039–1224–6 paperback This book is printed on paper suitable for recycling and made from fully managed and sustained forest sourcesA catalogue record for this book is available from the British Library. Library of Congress Cataloging-in-Publication Data p. cm. Includes bibliographical references and index. ISBN 0 − 333 − 00000 − 01.10 9 8 7 6 5 4 3 2 1 12 11 10 09 08 07 06 05 04 03 Printed in Great Britain by Antony Rowe Ltd, Chippenham and Eastbourne    Contents Preface xvii  Acknowledgements  xix 1. Structural Analysis Techniques 1 1.1 Resumé of Analysis Techniques 1 1.2 Method of Sections for Pin-Jointed Frames 1 1.2.1 Example 1.1: Pin-Jointed Truss 2 1.3 Method of Joint Resolution for Pin-Jointed Frames 4 1.4 Unit Load Method to Determine the Deflection of Pin-Jointed Frames 6 1.4.1 Example 1.2: Deflection of a Pin-Jointed Truss 6 1.5 Shear Force and Bending Moment 10 1.5.1 Shear Force Diagrams 13 1.5.2 Bending Moment Diagrams 16 1.5.3 Example 1.3: Beam with Uniformly Distributed Load (UDL) 20 1.5.4 Example 1.4: Beam with Combined Point Loads and UDLs 23 1.6 McCaulay’s Method for the Deflection of Beams 25 1.6.1 Example 1.5: Beam with Point Loads 26 1.6.2 Example 1.6: Beam with Combined Point Loads and UDLs 29 1.7 Equivalent UDL Technique for the Deflection of Beams 32 1.8 Elastic Shear Stress Distribution 33 1.8.1 Example 1.7: Shear Stress Distribution in a Rectangular Beam 34 1.9 Elastic Bending Stress Distribution 36 1.9.1 Example 1.8: Bending Stress Distribution in a Rectangular Beam 38 1.10 Transformed Sections 39 1.10.1 Example 1.9: Composite Timber/Steel Section 40 1.11 Moment Distribution 42 1.11.1 Bending (Rotational) Stiffness 44 1.11.2 Carry-Over Moment 45 1.11.3 Pinned End 45 1.11.4 Free and Fixed Bending Moments 45  iv Contents 1.11.5 Example 1.10: Single-span Encastre Beam 47 1.11.6 Propped Cantilevers 49 1.11.7 Example 1.11: Propped Cantilever 50 1.11.8 Distribution Factors 53 1.11.9 Application of the Method 54 1.11.10 Example 1.12: Three-span Continuous Beam 55 2. Design Philosophies 63 2.1 Introduction 63 2.2 Permissible Stress Design 63 2.3 Load Factor Design 63 2.4 Limit State Design 64 2.5 Design Codes 65 2.6 Eurocodes 67 2.6.1 National Annex 67 2.6.2 Normative and Informative 68 2.6.3 Terminology, Symbols and Conventions 68 2.6.3.1 Decimal Point 68 2.6.3.2 Symbols and Subscripts 682.6.4 Limit State Design 69 2.6.5 Design Values 70 2.6.5.1 Partial Safety Factors 712.6.6 Conventions 73 3. Structural Loading 74 3.1 Introduction 74 3.1.1 Dead loads: BS 648:1964 74 3.1.2 Imposed Loads: BS 6399-1:1996 74 3.1.3 Imposed Roof Loads: BS 6399-3:1988 75 3.1.4 Wind Loads: BS 6399-2:1997 75 3.2 Floor Load Distribution 75 3.3 Example 3.1: Load Distribution −  One-way Spanning Slabs 76 3.4 Example 3.2: Load Distribution −  Two-way Spanning Slabs 77
Search
Tags
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x