Games & Puzzles

Manufacturing 1 Expt.

Description
Manufacturing 1 Expt.
Published
of 3
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  Higher Colleges of Technology Fujairah Mens College Student Name: ________________________________ Student Number: _______________________________ Course Name: ________________________________ Course Number: _________________________________ Date of Performance: ____________________ Date of Submission: ____________________  Score: ________________________________  Faculty: Prepared by: Mr Frederic E  XPERIMENT  N O . 2I NJECTION  M OLDING  ( P LASTICS  )  Low Temperature Casting INTRODUCTION :(Write a brief introduction.)OBJECTIVE  To allow the students the opportunity to safely and easily partake in the injection moldingprocess ( lastic Manufacturing )A ARATUS/Equipment REQUIRED:QUANTITYDESCRI TION 1 PairLeather Gloves1 Injection Molding Machine1Safety Lab Coat1Plastic Material1Clear Goggles SAFETY RECAUTIONS:EX ERIMENTAL ROCEDURES: 1.Position the Injection molding machine on a flat surface close to a 230V outlet socket.2.Plug the unit into the 230V supply.3.Select your desired plastic material for your manufacturing procedure.4.Place your selected plastic material into the melting guide barrel.5.Power the unit ON.  From cold, the unit will take approximately 15-20 minutes to heat up to temperature.6.Once the mold has been securely fitted into the machine, lock it using the lever.7.Once the plastic is molten and ready to be poured, the lever can now be lower down and pouringcan begin.8..Allow the mould to stand for approximately 30 seconds before withdrawing the mould.9.Let the ejector pin push the molded parts away from the mold.10.Switch off the machine. Safety unplug the machine from the power source. Prepared by: Mr Frederic Wear safety clear goggles, gloves, apron.Be cautious in handling hot surfaces.Apply only the correct temperature and pressure in the machine.  REFERENCES: Prepared by: Mr Frederic ANALYSIS AND DISCUSSION:CONCLUSIONS:
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x