Presentations

Solid Works Tutorial-Making Wind Turbine Blade

Description
Solid Works Tutorial-Making Wind Turbine Blade
Categories
Published
of 26
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  Ken Youssefi Introduction to Engineering  –  E10 1  Various Blade designs Ken Youssefi Introduction to Engineering  –  E10 2  Ken Youssefi Introduction to Engineering  –  E10 3  The Blade Shape Ken Youssefi Introduction to Engineering  –  E10 4 Design groups should conduct a thorough search of the Internet to obtain information on wind turbine blade design and efficiency. Based on your research, decide on the number and general shape of the blade.  Constraints:  Total dimension of the turbine blade assembly (diameter of the swept area) should not exceed 6 inches. The propeller must fit within the 6 inch diameter circle   6 in.
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x