Documents

Abaqus_Solver_Interface_9.0_User's_Guide[1]

Description
HyperWorks 9.0 User's Guide Abaqus Solver Interface Altair Engineering Contact Information Web site FTP site www.altair.com Address: ftp.altair.com or ftp2.altair.com or http://ftp.altair.com/ftp Login: ftp Password: Location North America China France Germany India Telephone 248.614.2425 86.21.5393.0011 33.1.4133.0992 49.7031.6208.22 91.80.6629.4500 1.800.425.0234 (toll free) 39.800.905.595 81.3.5396.2881 82.31.728.8600 46.46.286.2052 44.1926.468.600 55.11.3884.0414 64
Categories
Published
of 284
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  HyperWorks 9.0 User's GuideAbaqus Solver Interface  Altair Engineering Contact Information Web site   www.altair.com FTP site  Address: ftp.altair.com or ftp2.altair.com or http://ftp.altair.com/ftpLogin: ftpPassword: <your e-mail address> Location Telephone e-mail North America 248.614.2425 hwsupport@altair.comChina 86.21.5393.0011 support@altair.com.cnFrance 33.1.4133.0992 francesupport@altair.comGermany 49.7031.6208.22 hwsupport@altair.deIndia 91.80.6629.45001.800.425.0234 (tollfree)support@india.altair.comItaly 39.800.905.595 support@altairengineering.itJapan 81.3.5396.2881 support@altairjp.co.jpKorea 82.31.728.8600 support@altair.co.krScandinavia 46.46.286.2052 support@altair.seUnited Kingdom 44.1926.468.600 support@uk.altair.comBrazil 55.11.3884.0414 br_support@altair.comAustralia 64.9.413.7981 anzsupport@altair.comNew Zealand 64.9.413.7981 anzsupport@altair.comThe following countries have distributors for Altair Engineering: Mexico, Romania, Russia, South Korea,Singapore, Spain, Taiwan, and Turkey. See www.altair.com for complete contact information. © 2008 Altair Engineering, Inc. All rights reserved. No part of this publication may be reproduced,transmitted, transcribed, stored in a retrieval system, or translated to another language without the writtenpermission of Altair Engineering, Inc. To obtain this permission, write to the attention Altair Engineering legaldepartment at: 1820 E. Big Beaver, Troy, Michigan, USA, or call +1-248-614-2400. Trademark and Registered Trademark Acknowledgments  Listed below are Altair  ®  HyperWorks  ®  applications. Copyright  ©  Altair Engineering Inc., All Rights Reservedfor:HyperMesh  ®  1990-2008; HyperCrash™ 2001-2008; OptiStruct  ®  1996-2008; RADIOSS™ 1999-2008;HyperView  ®  1999-2008; HyperView Player  ®  2001-2008; HyperStudy  ®  1999-2008; HyperStudy  ®  DSS 2002-2008; HyperGraph  ®  1995-2008; HyperGraph  ®  3D 2005-2008; MotionView  ®  1993-2008; MotionSolve  ®  2002-2008; HyperForm  ®  1998-2008; HyperXtrude  ®  1999-2008; FEModel™ 2004-2008; Process Manager™ 2003-2008; HyperDieDynamics™ 2007-2008; Templex™ 1990-2008; Data Manager™ 2005-2008; MediaView™1999-2008; Batch Mesher™ 2003-2008; TextView™ 1996-2008; Manufacturing Solutions™ 2005-2008.All other trademarks and registered trademarks are the property of their respective owners.  HyperWorks 9.0 User's Guide - Abaqus Solver InterfaceiAltair Engineering Proprietary Information of Altair Engineering HyperWorks 9.0 User's Guide - Abaqus Solver Interface ........................................................................................................................................... 1   HyperMesh Interface with the Abaqus Solver ............................................................................................................................................... 3   Changes in Sectional Property Handling............................................................................................................................................... 5Importing............................................................................................................................................... 5   By HM Comment............................................................................................................................................... 5   Support of Include Files............................................................................................................................................... 9   Templates............................................................................................................................................... 9   Summary Templates............................................................................................................................................... 11   HyperMesh Entities............................................................................................................................................... 11   Control Cards............................................................................................................................................... 11   Coordinate Systems............................................................................................................................................... 11   Curves............................................................................................................................................... 11   Elements............................................................................................................................................... 11   Groups............................................................................................................................................... 11   Load Collectors............................................................................................................................................... 11   Loads............................................................................................................................................... 11   Load Steps............................................................................................................................................... 11   Materials............................................................................................................................................... 11   Multi-point Constraints............................................................................................................................................... 11   Nodes............................................................................................................................................... 11   Output Blocks............................................................................................................................................... 11   Properties............................................................................................................................................... 11   Sets............................................................................................................................................... 101   Abaqus Utility Menu............................................................................................................................................... 101   Component Browser............................................................................................................................................... 101   Contact Manager............................................................................................................................................... 101   Dummy Import/Export............................................................................................................................................... 101   Set Browser............................................................................................................................................... 101   Solid Face Alignment............................................................................................................................................... 101   Step Manager............................................................................................................................................... 215   Results Translation............................................................................................................................................... 215   Translating Complex Results............................................................................................................................................... 215   Translating Element Results for Different Positions............................................................................................................................................... 215   Supported Result Types............................................................................................................................................... 215   Include File Support............................................................................................................................................... 215   Free Body Diagram............................................................................................................................................... 229   Supported Keywords  iiAltair EngineeringHyperWorks 9.0 User's Guide - Abaqus Solver Interface Proprietary Information of Altair Engineering ............................................................................................................................................... 235   Unsupported Data Blocks............................................................................................................................................... 237   Abaqus to/from Nastran Mapping........................................................................................................................................... 245   HyperWorks Desktop Interface with the Abaqus Solver ............................................................................................................................................... 247   HyperView Overview............................................................................................................................................... 247   Model Data............................................................................................................................................... 247   Result Data from ODB............................................................................................................................................... 247   Parts and Instances in the ODB File............................................................................................................................................... 269   MotionView............................................................................................................................................... 269   Exporting MDL Model Files to Abaqus............................................................................................................................................... 279   HyperGraph............................................................................................................................................... 279   ODB History Results in the HyperView Plot Window
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks