Documents

Huawei Configuration.pdf

Description
10/10/2014 Huawei Configuration http://huaweiproducts.kazeo.com/huawei-configuration/huawei-configuration,r2051352.html 1/9 + huaweiproducts Follow me Join now Voz Total Controle Ilimitado Fixo e Pré Ilimitado a partir de R$ 49,90 /mês Voz Total Ilimitado com DDD Fixo e Pré Ilimitado com DDD a partir de R$ 59,90 /mês How to Configure IPv6 Services in the FTTB+HGW Scenario Huawei products Huawei Switch MA5600 HG8245 S2700-26TP-EI-AC Huawei S9300 Huawei Transmission Huawei Symantec Huawei rou
Categories
Published
of 9
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Related Documents
Share
Transcript
  10/10/2014Huawei Configurationhttp://huaweiproducts.kazeo.com/huawei-configuration/huawei-configuration,r2051352.html1/9 +huaweiproductsFollow meJoin now Voz Total Controle IlimitadoFixo e Pré Ilimitado   a partir deR$ 49,90 /mês Voz Total Ilimitado com DDDFixo e Pré Ilimitado com DDD   a partir deR$ 59,90 /mês How to Configure IPv6 Services in the FTTB+HGW Scenario Huawei productsHuawei SwitchMA5600HG8245S2700-26TP-EI-ACHuawei S9300Huawei TransmissionHuawei SymantecHuawei router configurationHuawei Router Technical SpecificationsHuawei ConfigurationSondage Aimez-vous mon blog ?  Oui Non Voter  Afficher les résultatsMoteur de recherche Rechercher  A découvrir Créer un blogHuawei Networking Products Overview This section describes the methods for configuring IPv6 services in the FTTB+HGW scenario. Works for MA5683T   , MA5680T, MA5608T, MA5603T...   Application Scenario The FTTB+HGW networking includes two scenarios: The ONU provides the voice service inone scenario and the HGW provides the voice service in another scenario. After IPv6 isintroduced to the network, the voice service still uses IPv4 so that these two voice scenariosdo not change after IPv6 introduction.   FTTB+HGW Application ScenarioFigure 1 shows an FTTB+HGW network. The Huawei OLT is deployed at the CO andconnects to the MAN by aggregation, and the ONU is deployed in the buildings or street fiber distribution terminals. Access interfaces are deployed on the HGW that connects to the ONUusing LAN or xDSL upstream transmission (deployed in user houses). Together with upper layer devices, the FTTB+HGW network supports the HSI and IPTV services implemented bythe schemes of the Huawei fixed broadband solution for IPv6: IPv4/IPv6 DS+NAT+PPPoE,IPv4/IPv6 DS+NAT +IPoE, and DS-Lite+PPPoE (for the HSI services) and IPv4/IPv6 DS+IPoEand IPv4/IPv6 DS +PPPoE (for the IPTV service).1 Upstream networking: The HGW connects to the ONU through upstream ETH or xDSL port.   2 HSI service: The HGW has Layer 3 functions (such as PPPoE dial-up and NAT), whichenable multiple PCs of a family to access the Internet at the same time. – If the HGW uses the IPv4/IPv6 DS scheme, the PPPoE or IPoE channel that supportsboth IPv4 and IPv6 is established between the HGW and the BRAS. The OLT and ONUperform Layer 2 forwarding, irrespective of whether the access service is IPv4 or IPv6.Service configurations for IPv4 and IPv6 are the same. Only the ACL, anti-IP spoofing,and DHCP option configurations for IPv4 and IPv6 are different. – If the HGW uses the DS-Lite scheme, the PPPoE channel that supports only IPv6 isestablished between the HGW and the BRAS. As for IPv4, the HGW encapsulates IPv4packets and transmits them to the BRAS or CGN using the 4in6 tunnel. The OLT and ONUperform Layer 2 forwarding, irrespective of whether the access service is IPv4 or IPv6. Service Huawei products overviewHuawei Router   Photos Paris configurations for IPv4 and IPv6 are the same. Only the ACL, anti-IP spoofing, and DHCPoption configurations for IPv4 and IPv6 are different.   3 IPTV service: Users can preview or view IPTV programs by connecting an STB to the HGW.STB supports IPv4/IPv6 DS and uses IPv4 or IPv6 (cannot be used together) to carry IPTVservices. – If the STB uses IPoE, choose the ONU preferentially to duplicate multicast flows. Onthe ONU, IPv6 and IPv4 multicast services are configured in the same way but withdifferent commands. On the OLT, service channels to the ONU need to be established,multicast flows do not need to be duplicated, and IGMP IPv6 data needs to beconfigured. – If the STB uses PPPoE, it establishes a PPPoE connection to the BRAS. The OLT, ONU,and HGW only forward PPPoE service flows and do not process multicast services.Therefore, this scheme is not recommended.   4 Voice service: The voice service can be provided by the ONU with the build-in voicemodule or the build-in IAD of the HGW. The VoIP service on ONU or HGW is stillimplemented by IPv4. Figure 1 FTTB+HGW service networking FTTB+HGW (ONU Provides the Voice Service) Configuration Procedure The following figure shows the IPv6 service configuration procedure in the FTTB+HGW (ONUprovides the voice service) scenario. In this scenario, the planning and configurationprocedure/ method for IPv6 and IPv4 services are almost the same except the followingdifferences. On the OLT side, multicast service channels between the OLT and ONU and partconfiguration commands of the security policy are different. On the ONU side, configurationcommands of IPTV multicast services are different  10/10/2014Huawei Configurationhttp://huaweiproducts.kazeo.com/huawei-configuration/huawei-configuration,r2051352.html3/9   NOTE Texts in blue show the configuration (on OLT and ONU ) difference between IPv6 and IPv4.For differences between the HGW's IPv6 and IPv4 service processing, see documentation of the HGW products.   FTTB+HGW (HGW provides the voice service) Configuration Procedure The following figure shows the IPv6 service configuration procedure in the FTTB+HGW (ONUprovides the voice service) scenario. In this scenario, the planning and configurationprocedure/ method for IPv6 and IPv4 services are almost the same except the followingdifferences. On the OLT side: Multicast service channels between the OLT and ONU and partconfiguration commands of the safety policy are different. On the ONU side: Configurationcommands of IPTV multicast services are different.   NOTE Texts in blue show the configuration (on OLT and ONU ) difference between IPv6 and IPv4.For differences between the HGW's IPv6 and IPv4 service processing, see documentation of the HGW products.   ProcedureStep 1 Configure GPON ONU profiles.1. Configure a DBA profile.huawei(config)# dba-profile add profile-name fttb_dba type3 assure 8192 max20480 2. Configure an ONU line profile.huawei(config)# ont-lineprofile gpon profile-id 10 profile-name fttb(c) huawei(config-gpon-lineprofile-10)# tcont 4 dba-profile-name fttb_dba huawei(config-gpon-lineprofile-10)# gem add 11 eth tcont 4 cascade on huawei(config-gpon-lineprofile-10)# gem add 12 eth tcont 4 cascade on huawei(config-gpon-lineprofile-10)# gem add 13 eth tcont 4 cascade on huawei(config-gpon-lineprofile-10)# gem mapping 11 0 vlan 8 huawei(config-gpon-lineprofile-10)# gem mapping 12 1 vlan 1001 huawei(config-gpon-lineprofile-10)# gem mapping 13 2 vlan 200 huawei(config-gpon-lineprofile-10)# commit huawei(config-gpon-lineprofile-10)# quit 3. (Optional) Add an alarm profile.EchoLife GPON Terminal Service Manual 3 Configuration Issue In this example, the defaultalarm profile is used and therefore the configuration of the alarm profile is not required.   Step 2  Add an ONU to an OLT. Assume that the ID of GPON port 0/2/1 is 1, SN is 32303131B39FD641, management mode isSNMP, and the bound line profile is fttb(c). Connect the ONU to such a GPON port through theoptical splitter.There are two modes to add an ONT: add an ONT offline and confirm an automaticallydiscovered ONU.1 Add an ONU offline.huawei(config)# interface gpon 0/2  10/10/2014Huawei Configurationhttp://huaweiproducts.kazeo.com/huawei-configuration/huawei-configuration,r2051352.html4/9 huawei(config-if-gpon-0/2)# ont add 1 ontid 1 sn-auth 32303131B39FD641snmp ont-lineprofile-name fttb(c)   2 Confirm an automatically discovered ONU.huawei(config)# interface gpon 0/2 huawei(config-if-gpon-0/2)# port 1 ont-auto-find enable huawei(config-if-gpon-0/2)# display ont autofind 1 huawei(config-if-gpon-0/2)# ont confirm 1 ontid 1 sn-auth 32303131B39FD641snmp ont-lineprofile-name fttb(c)   3 (Optional) Bind the alarm profile to the ONU.In this example, default alarm profile 1 is used and therefore the configuration of the alarmprofile is not required.   Step 3 Check the ONU status. After an ONU is added, run the display ont info command to query the current status of theONU. Ensure that Config flag of the ONU is active , Run State is online , and Config state is normal .huawei(config-if-gpon-0/2)# display ont info 1 1 ---------------------------------------------------------------------F/S/P : 0/2/1ONT-ID : 1Control flag : active //The ONU is activated.Run state : online //The ONU is online.Config state : normal //The ONU configurations are recoverednormally....//The rest of the response information is not provided here.huawei(config-if-gpon-0/2)# quit   Step 4 Configure the inband management VLAN and IP address of the OLT.huawei(config)# vlan 8 smart huawei(config)# vlan priority 8 6 huawei(config)# interface vlanif 8 huawei(config-if-vlanif8)# ip address 192.168.50.1 24 huawei(config-if-vlanif8)# quit   Step 5 Configure the inband management VLAN and IP address of the ONU.huawei(config)# interface gpon 0/2 huawei(config-if-gpon-0/2)# ont ipconfig 1 1 static ip-address 192.168.50.2 mask255.255.255.0 gateway192.168.50.254 vlan 8 huawei(config-if-gpon-0/2)# quit   Step 6 Configure an inband management service port.
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks